Board Features

Biostar wasn’t just the first manufacturer to release and produce an ITX motherboard for the AM4 platform, but the X370GTN is one of the cheapest X370 boards on the market. One of the benefits that some vendors are exploiting is that users can build a small and affordable system with 8-core processors with Ryzen, although few are reluctant to go into the mini-ITX form factor. 

Biostar X370GTN Mini ITX Motherboard
Warranty Period 3 Years
Product Page Link
Price $110
Size Mini-ITX
CPU Interface AM4
Chipset AMD X370
Memory Slots (DDR4) Two DDR4
Supporting 32GB
Dual Channel
Up to 3200 MHz
Video Outputs HDMI 1.4
DVI-D
Network Connectivity Realtek RTL8118AS
Onboard Audio Realtek ALC892
PCIe Slots for Graphics (from CPU) 1 x PCIe 3.0 (x16)
PCIe Slots for Other (from PCH) None
Onboard SATA Four, RAID 0/1/10
Onboard M.2 1 x PCIe 3.0 x4, on Rear
USB 3.1 (10 Gbps) 1 x Type-C
1 x Type-A
USB 3.0 (5 Gbps) 4 x Rear Panel
1 x Header
USB 2.0 2 × via header
Power Connectors 1 x 24-pin ATX
1 x 4-pin CPU
Fan Headers 1 x CPU (4-pin)
1 x System (4-pin)
IO Panel 4 x USB 3.1 (USB 3.1 Gen 1)
1 x USB 3.1 (USB 3.1 Gen 2)
1 x USB 3.1 Type-C
1 x Network RJ-45
1 x DVI-D
1 x HDMI 1.4
1 x Combo PS/2
5 x 3.5 mm Audio Jacks
1 x Optical SPDIF Out Port

The size of the motherboard means that there is only two memory slots, although Biostar lists these as supporting up to DDR4-4000. Although RGB does not enhance performance, it is a popular feature (especially for marketing), and the X370GTN has an RGB header that is controllable through software as well as some embedded LEDs on one of the heatsinks.

In The Box

We get the following:

  • Four black SATA cables
  • User manual
  • Driver installation disk
  • I/O shield

Inside the box, we have the minimum number of accessories which you would expect to find with any motherboard. This includes four black straight SATA cables, one for every SATA port. If Biostar were going to plug the 'gaming' aspect of the package, we might have expected something a little extra here, however, the cost is also a factor.

Visual Inspection

The X370GTN features a fairly basic layout, with an all-black PCB and a pair of small racing styled heat sinks, one covering the power delivery and one on the chipset. The power delivery heatsink is small and contains a wave of RGB LED lights integrated into it. While this heatsink manages to cover what is intended, the size seems relatively inadequate and it doesn’t have much mass to it. The chipset heatsink is also light, to which Biostar are using push pins for mounding and equipped it with a subtle carbon effect wrapper to enhance the look.

There are only two fan headers on the board, found either side of the two memory slots. This used to be normal for mini-ITX motherboards, although recently the main manufacturers have started supporting three as a standard. Looking to processor power connectivity, only a single 4pin 12V power connector is required to power the board. This is more than capable of running any Ryzen CPU at stock, but might not be sufficient for large overclocks. 

A noticeable feature on the Biostar board is the use of 5k rated solid state polymer capacitors, which is a little disappointing. Most AM4 motherboards usually have 10k or 12k rated caps, which corresponds to their longevity. These caps are unmarked/unbranded, so it is unclear where Biostar is sourcing them from. At the bottom end of the motherboard, Biostar has equipped four SATA ports, with two of them running parallel above the single PCIe x16 slot, and the other two next to the memory slots. Also in this area are a pair of USB front panel headers, with one for USB 3.0 (5 Gbps) and the other for USB 2.0.

The board has a 4+3 phase power delivery design, which is typical given the size of the board and price point. The X370GTN features seven ER30 1712 Ferrite chokes, seven NIKO Semiconductor MOSFETs and is controlled by the Intersil ISL95712. The 4+3 phase is split into two separate sections with four being dedicated to the CPU, with the other three likely in place for upcoming APUs (Ryzen with bundled graphics).

On the rear panel, we find a four USB 3.0 (5 Gbps) ports, and two USB 3.1 (10 Gbps) ports, with the latter having a Type-C and Type-A. The Realtek Dragon networking chip provides the gigabit networking port, while the Realtek ALC892 provides the audio jacks. A PS/2 combo port is also present, and video outputs are a single DVI-D connector, supporting resolutions of up to 1920 x 1200 @ 60Hz, and a sole HDMI 1.4 output supporting 3840 x 2160 @ 30Hz. These video outputs are for users who are investing in the current Bristol Ridge APUs, or looking to potential future APUs supported on the platform.

Even though the rear PCB of the Biostar X370GTN is mostly covered up by the AMD cooler installation backplate, Biostar has included a single PCIe 3.0 x4 M.2 port to the rear. When using the M.2 port in PCIe mode, Ryzen processors will offer a maximum bandwidth rate of up to PCIe 3.0 x4, while Bristol Ridge APUs allow for up to a maximum of PCIe 3.0 x2. Both 2260 and 2280 sized options featuring M key type connectors are supported by this board.

Biostar X370GTN Overview And Overclocking BIOS And Software
POST A COMMENT

31 Comments

View All Comments

  • h3ll0 - Monday, June 17, 2019 - link

    I've had this board since late november 2017 and I've never encountered a single issue with it. Yes it's not made by the most well known brand, however biostar has been around just as long as Asus and other manufacturers so they must be doing something right. I have mine paired with a R5 1600 @ 3.8Ghz 1.35625V through ryzen master and 16GB 3200Mhz ram in a CoolerMaster Elite 130 with a . The one downside that is mentioned in the review is the lack of setting a fixed voltage value in the BIOS, however ryzen master works just fine. For all the people whinging about the small vrm heatsink, most VRMs don't even need a heatsink as they designed to run without one and can be rated from 85C-125C and still function just fine, the problem is when you push voltages high and have no airflow or a heatsink on them, so as long as there is either a heatsink or airflow, but ideally both, you'll be fine. Reply

Log in

Don't have an account? Sign up now