Despite AMDs resurgence to kick it with the high end of mainstream processors, the biggest volume sales occur more in the mid-range where the parts are often competitively priced. In the segment, AMD currently has the Ryzen 5 2600 and the 2400G at retail, but OEMs can use two others: the 2500X and the 2300X. We don't know if we'll ever see these at retail, but we obtained both CPUs for a review.

AMD’s Ryzen 2500X and Ryzen 3 2300X: Filling in Some Gaps

Much like the first gen counterparts, the 2500X is a quad core processor with simultaneous multi-threading while the 2300X is a straight forward quad core. The X processors usually have a higher thermal design power (TDP) than hypothetical non-X equivalents, allowing them to take advantage of AMDs Extreme Frequency Range technology for higher turbos for longer given sufficient cooling, although these are set at 65W, similar to non-X processors. Normally X processors come with better stock coolers at retail, however as these are OEM only processors, it is up to the system integrator to provide sufficient cooling.

AMD's Mainstream Stack
AnandTech Zen Cores
w/SMT
Base
Freq
Turbo
Freq
L3
(MB)
Vega
CUs
TDP MSRP
Ryzen 7 2700X Zen+ 8 / 16 3700 4300 16 - 105W $329
Ryzen 7 2700 Zen+ 8 / 16 3200 4100 16 - 65W $299
Ryzen 5 2600X Zen+ 6 / 12 3600 4200 16 - 95W $229
Ryzen 5 2600 Zen+ 6 / 12 3400 3900 16 - 65W $199
Ryzen 5 2500X* Zen+ 4 / 8 3600 4000 8 - 65W -
Ryzen 5 2400G Zen 4 / 8 3600 3900 4 11 65W $169
Ryzen 3 2300X* Zen+ 4 / 4 3500 4000 8 - 65W -
Ryzen 3 2200G Zen 4 / 4 3500 3700 4 8 65W $99
Athlon 240GE Zen 2 / 4 3500 - 4 3 35W $75
Athlon 220GE Zen 2 / 4 3400 - 4 3 35W $65
Athlon 200GE Zen 2 / 4 3200 - 4 3 35W $55
* Released but not at retail

Both of these processors use AMD's Zen+ microarchitecture, built on GlobalFoundries' 12nm manufacturing process node. This means it has better voltage, frequency, and power characteristics over the first generation Ryzen, allowing them to run faster at the same power, or cooler at the same performance. AMD has also applied minor tweaks to the design, which gives the processor an additional 3% performance at the same frequency to first generation Ryzen. We tested and verified these claims in our review of AMD's first Zen+ processors.

www.anandtech.com/show/12625/amd-second-generation-ryzen-7-2700x-2700-ryzen-5-2600x-2600/4

Tackling the Midrange

If you believe the sales numbers posted by German retailer MindFactory, or the bestselling lists over at Amazon, it would be hard not to notice that out of the first generation of Ryzen processors, the Ryzen 5 1600 has been one of the top best sellers. At an initial release price of $219, followed by subsequent cuts, it hit an aggressive price point and offered six high performance cores with simultaneous multi-threading where Intel could only offer four cores without hyperthreading. It also allowed for overclocking, providing users with the potential to squeeze more out of the processor if they had the cooling to do so. Pair this CPU with a good mid-priced motherboard and the bundled cooler and it is easy to see why this CPU had been successful. 

For the second generation of Ryzen, AMD launched four CPUs at retail: the 2700X, 2700, 2600X, and the 2600, which we reviewed at launch (click here for the review). Technically we have a direct replacement to the 1600 in the 2600, which at $199, is very competitive. However, in contrast to the first generation of CPU-only products, AMD never did fill up the rest of the processor stack with CPU-only options. Under the 2600, AMD recommends the 2400G, a quad core with simultaneous multi-threading and integrated graphics at $169, then the 2200G at $99 which is another quad core with integrated graphics but without simultaneous multi-threading. AMD used to have four processors in this space (1500X, 1400, 1300X, 1200) which were also very competitive. We tested them all when they were launched against the competition, and the parts had obvious strengths and weaknesses.

Despite AMD recommending these parts with integrated graphics up to $165 (current Amazon pricing), it would appear that their system builder partners have requested a CPU only option below this price point. This is where the Ryzen 5 2500X and Ryzen 3 2300X come in. These parts are generational updates against the 1500X and 1300X, but at present only available to AMD’s partners that build full systems. These parts cannot be ‘officially’ purchased at retail; however it is likely that some will filter out onto the grey or second hand markets.

 

The main obvious reason for not releasing several parts at similar price points is to cannibalize each other’s sales – by offering the 2500X and 2300X as OEM-only parts, it allows AMD to maintain a rigid stock based on order requirements, while the 2400G/2200G can be sold on the open market. There could be the argument from the side of PR that at this price bracket, $150 and below, emerging markets benefit most from integrated graphics solutions. But that doesn’t preclude selling these parts at retail elsewhere in the world. Regardless of the reasons, we still wanted to test these CPUs to see where they stand, and ultimately if the sub-$150 plus discrete GPU self-builder would benefit from a CPU-only option.

Competition

Normally when we compare processors, we compare on two fronts: core/thread count, and price. Very rarely do our review processor(s) have the same contestant for both. In this case, we don't have a list price for the 2300X or 2500X, which makes this a little difficult. In order to be competitive however, we would expect the two CPUs to fit price wise where their naming suggests - above the 2200G and 2400G respectively.

When it comes to competitive Intel processors then, on price, the competition is around the Core i3-8100 at $120, or the Core i3-8350K, currently on sale for ~$190. These parts is a quad core without hyperthreading, which automatically puts it on par more with the Ryzen 3 2300X. Intel no longer offers anything below an 8-core with hyperthreading, which makes a comparison with the Ryzen 5 2500X difficult. In terms of thread parity, then either the quad-core Core i3-8100/i3-8350K with four threads is still relevant, or the six core i5-9600K with six threads comes into play, although it is worth bearing in mind that this is a $260 processor. Going for eight threads on Intel for comparison just blows out the budget, making a comparison more irrelevant.

When we set the comparison against AMD, the natural competition is the 2200G and 2400G, but also the 2600, based on price. The 2200G and 2400G are APUs, and this affords a couple of pros and cons. In normal AMD Ryzen CPUs without integrated graphics, the silicon has eight cores split into two 'core complexes' of four cores each. Transferring data between cores thus has two latencies - within a complex it is fast, but between the complexes it is slightly slower. There are two ways to enable four cores on this design, in a 2+2 configuration, which gives access to the full L3 cache on each complex but has slower complex-to-complex communication, or a 4+0 configuration which keeps core communication fast but halves the L3. As the Ryzen 5 2500X and Ryzen 3 2300X only have half the L3 available, this means they are in 4+0 mode. If we compare this to the APUs, the 2200G and 2400G, because they combine one quad-core complex with integrated graphics, they also do not have a complex-to-complex latency, but the downsides of the APU configuration though is that these parts only have 4 MB of L3 cache (compared to 8MB), and they are running on the older Zen microarchitecture, which clock for clock is around 3% slower.  

If AMD ever decides to release these processors at retail with corresponding stock coolers, on paper at least, they appear to be very competitive. This is one reason why we are testing these parts in a review.

Recommended Reading on AMD Ryzen
2700X and 2600X
CPU Review
2400G and 2200G
APU Review
Threadripper 2
2990WX Review
Best CPUs
2700 and 2600
CPU Review
APU Memory Scaling Threadripper 2
2970WX Review
Delidding a
Ryzen APU

Pages In This Review

  1. Analysis and Competition
  2. Test Bed and Setup
  3. 2018 and 2019 Benchmark Suite: Spectre and Meltdown Hardened
  4. CPU Performance: System Tests
  5. CPU Performance: Rendering Tests
  6. CPU Performance: Office Tests
  7. CPU Performance: Encoding Tests
  8. CPU Performance: Web and Legacy Tests
  9. Gaming: World of Tanks enCore
  10. Gaming: Final Fantasy XV
  11. Gaming: Shadow of War
  12. Gaming: Civilization 6
  13. Gaming: Ashes Classic
  14. Gaming: Strange Brigade
  15. Gaming: Grand Theft Auto V
  16. Gaming: Far Cry 5
  17. Gaming: Shadow of the Tomb Raider
  18. Gaming: F1 2018
  19. Power Consumption and TDP
  20. Conclusions and Final Words
Test Bed and Setup
Comments Locked

65 Comments

View All Comments

  • Le Québécois - Monday, February 11, 2019 - link

    Ian, any reason why more often than not, you seem to "skip" 1440 in your benchmarks? It's only present for a few games.

    Considering the GTX 1080, your best card, is always the bottleneck at 4K, as your numbers show, wouldn't it make more sense to focus more on 1440 instead?

    Especially considering it's the "best" resolution on the market if you are looking for a high pixel density yet still want to run your games at a playable levels of fps.
  • Ian Cutress - Monday, February 11, 2019 - link

    Some benchmarks are run at 1440p. Some go up to 8K. It's a mix. There's what, 10 games there? Not all of them have to conform to the same testing settings.
  • Le Québécois - Tuesday, February 12, 2019 - link

    Sorry for the confusion. I can clearly see we've got very different settings in that mix. I guess a more direct question would be: why do it this way and not with a more standardized series of test?

    A followup question would also be, why 8K? You are already GPU limited at 4K so your 8K result are not going to give any relevant information about those CPUs.

    Sorry, I don't mean to criticized, I simply wish to understand your thought process.
  • MrSpadge - Monday, February 11, 2019 - link

    What exactly do you want to see there that you can't see at 1080p? Differences between CPUs are going to be muddied due to approaching the GPU limit, and that's it.
  • Le Québécois - Tuesday, February 12, 2019 - link

    Well, at 1080, you can definitely see the difference between them, and exactly like you said, at 4K, it's all the same because of the GPU limitations. 1440 seems more relevant than 4K considering this. This is after all, a CPU review and most of the 4K results could be summed up by "they all perform within a few %".
  • neblogai - Monday, February 11, 2019 - link

    End of page 19: R5 2600 is really 65W TDP, not 95W.
  • Ian Cutress - Monday, February 11, 2019 - link

    Doh, a typo in all my graphs too. Should be updated.
  • imaheadcase - Monday, February 11, 2019 - link

    Im on phone on AT and truly see how terrible ads are now. AT straight up letting scam ads now being served because desperate for revenue. 😂
  • PeachNCream - Monday, February 11, 2019 - link

    Is there a point in even mentioning that give how little control they now have over advertising? Just fire up the ad blocker or visit another site and let the new owners figure it out the hard way.
  • StevoLincolnite - Tuesday, February 12, 2019 - link

    Anandtech had Maleware/Viruses infect it's userbase years ago via crappy adverts.

    That was the moment I got Ad-Block. And that is the moment where I will never turn it off again.

Log in

Don't have an account? Sign up now