Belkin WeMo and Ubiquiti mFi Home Automation Platforms Review
by Ganesh T S on April 27, 2015 8:00 AM EST- Posted in
- Home Automation
- Belkin
- Ubiquiti Networks
- IoT
Introduction
The Internet of Things (IoT) concept has gained a lot of traction over the last couple of years. One of the main applications of IoT lies in the home automation space. Consumers have many options in this space, but none of them have the right combination of comprehensiveness, economy, extensibility and ease of use. Earlier this month, we discussed these aspects in detail and arrived at a set based on which different home automation systems / devices could be compared. Today, we look at two different solution families - WeMo from Belkin and mFi from Ubiquiti Networks - and compare them using the aspects that we arrived at earlier.
Most consumers are very familiar with Belkin's WeMo product line - it has wide retail availability and a great marketing push. On the other hand, the mFi platform from Ubiquiti Networks is probably not known to the average consumer. The primary reason is that it is a M2M (machine-to-machine) communication platform, intended for building automation. In addition, Ubiquiti's marketing push for the product line amongst the general consumers has been non-existent. Their distribution model makes it difficult for consumers to experience the products in a brick and mortar store.
Today's review will begin with a look at the members of the WeMo and mFi families and a brief introduction to the usage model for both. For the Ubiquiti Networks mFi, we cover how to setup a home automation controller, and link to the documentation of the APIs. We will also look at the user control interfaces in detail for both the WeMo and the mFi devices. For this piece, we only look at a subset of the devices available in both the product lines. We will also talk about the power consumption aspects in the concluding section. A summary table will simplify the comparison of the two product families across various home automation aspects.
41 Comments
View All Comments
Daniel Egger - Monday, April 27, 2015 - link
> But since an led light usually uses around 5 watt an hourWell that depends on your LED lighting, 5W will yield around 400lm which is equal to around 40W of incandescent lighting which is not really much unless you're talking cozy reading lamp. For my ambient living room lighting alone I have 2 PSUs with combined 210W output and running all channels at full brightness (which is crazily bright) they use around 130W. In addition I have 26W of Living Colors for accent lighting and another 12W lighting my bar.
> how many decades do you need to keep the light on before a 50$ light switch and 2-300$ total solution pays for itself
How would it *ever* pay for itself? Those solutions increase power consumption and do not offer any savings whatsoever: if I need my lights they're on, if I don't they're off -- it doesn't get simpler than that.
V900 - Monday, April 27, 2015 - link
HOLY CRAP that's a lotta lights and wattage you got there!I think my whole living room is lit with 10-12 watts or so. Then again, in Europe power can easily cost ten times of what it costs in North America. Especially the parts of NA that get their power from nuclear power plants or through hydro electric means.
And even in Europe with high power costs, LED bulbs has made conserving the lights and power sorta meaningless. Even when you pay 1-2$ pr kilowatts, forgetting to turn off the lights costs a lot less when your lightbulbs use 5-10 times less power.
Daniel Egger - Monday, April 27, 2015 - link
> HOLY CRAP that's a lotta lights and wattage you got there!Yes, but a regular nighttime light scene only takes around 40W in total which is not much. Even the 200W halogen uplight I had a couple of years ago took 120W at the darkest dimm setting while only lighting a fraction of the area. Heck, even the projector over my head is using almost 200W right now.
> I think my whole living room is lit with 10-12 watts or so.
You must have a small living room or prefer candlelight setups. ;) As I said my bar has 4 downlights with 3W each (80lm/W) and is by far the best LED light I've ever seen, very halogen-like -- I totally love that beautiful setup and it's easily as good and bright as the 4x20W halogen downlights which are installed next to them in the kitchen. But it's not even remotely possible to light the whole living room just with those...
malcolmh - Wednesday, April 29, 2015 - link
"$1-$2 per kilowatts"? Not sure where you get that assumption from.Here in the UK I'm paying £0.0945 / kWh, which is about 15 cents US. My plan also has a £0.25/day flat rate standing charge, but since that's a flat rate it's not really relevant here.
I also can't see the point of these devices though. /Maybe/ if you integrated them to a whole-room voice activation system, that worked as reliably as the video promoting Amazon Echo...
ganeshts - Monday, April 27, 2015 - link
Couple of examples:Vacation mode : You are out on vacation, but need to make your house look occupied to the outside world - If you could randomly turn on/off lights at night remotely / set such a schedule, that would be a deterrent against would-be burglars.
Home Theater setting : If it is night and you are starting to watch a movie on your TV, slowly dim and then switch off the lights.
Energy sensing outlets can help you determine what devices consume the most power and how you can optimize their usage. Check out reviews of smart outlets on Amazon - there are plenty of usage models. I do agree that they need to come down in cost - which is where the InWall outlets come into play - they don't really have that much premium over the generic outlets that are installed in the walls.
steven75 - Monday, April 27, 2015 - link
"they don't really have that much premium over the generic outlets that are installed in the walls."I beg to differ. $59 vs about $1.50 for a duplex outlet at the local hardware store is a massive premium.
I like the idea of this stuff very much, it's just that the price needs to be lower by a factor of about 10.
ganeshts - Monday, April 27, 2015 - link
You are right.. I was having the dimmer switches in mind when I wrote that:http://www.homedepot.com/b/Electrical-Dimmers-Swit...
The minimum is around $22 - the good ones around $30 ; There is a premium of around $30, but that is still less than the ~$60 premium for the outlets.
Daniel Egger - Monday, April 27, 2015 - link
> Vacation mode : You are out on vacation, but need to make your house look occupied to the outside world - If you could randomly turn on/off lights at night remotely / set such a schedule, that would be a deterrent against would-be burglars.Right, because burglars are utterly stupid; they don't notice that the car is absent for weeks but are easily fooled by randomly flicked lights (because that's what people do, rather than say turn it on on demand and depending on the sunset). Not to mention that the best protection against burglars here are roller shutters which tend to counter the idea of making light inside for the outsider to see.
> Energy sensing outlets can help you determine what devices consume the most power and how you can optimize their usage.
You'll only have to do that once per device. There's no point in doing it constantly; it's a huge waste of energy without any information gain.
V900 - Monday, April 27, 2015 - link
Actually, today's modern burglar doesn't have to sit in a parked car for hours to do surveillance on a potential house to burglarize.(I actually doubt they've ever done that, though that is the whole logic behind setting your lights on timers. No matter if we're talking about 3$ manual dollar store timers or 50$ Belkin internet timers.)
Even today's poorly equipped burglar can go on Facebook to see whether the owners are home, or if the whole family is in the Dominican Republic for two weeks.
And the 70$ Android handset put an end to the good old "What kinda burglar brings their smartphone to work?!?" argument.
Daniel Egger - Monday, April 27, 2015 - link
> Actually, today's modern burglar doesn't have to sit in a parked car for hours to do surveillance on a potential house to burglarize.My point exactly. Even though I don't use Facebook et al, it's quite easy to spot -- just by driving by -- whether we're at home. Hm, maybe I should switch my parking spots every now and then to create the illusion I'm at home. ;)