Gigabyte H55N-USB3 : Mini-ITX done the Gigabyte way...
by Rajinder Gill on June 15, 2010 7:49 AM EST- Posted in
- Motherboards
- Intel
- Gigabyte
- Mini ITX
Gigabyte’s component choices are very much in-line with what we find on their similarly priced micro-ATX boards; Realtek’s 8111E LAN and a couple of USB 3 ports supplied courtesy of NEC’s D720200F1 controller. All USB ports receive Gigabyte’s 3X power treatment, in that a single port can supply up to 1.5 amps in current for high power devices, which helps reduce charging times and the use of more devices in tandem without facing power dropouts to the USB hub. On/off charge is another function Gigabyte is keen to promote as a facet of the H55N-USB3’s capabilities. This feature allows you to charge devices such as an iPad or iPod even when the board is in standby state.
Audio duties are also taken care by Realtek, this time it's the new ALC892R, although we’re not provided with the Dolby Theater package that Gigabyte bundles with their micro-ATX motherboards. Gamers would probably have welcomed some kind of EAX package to improve game sonics as there’s no upgrade path other than USB audio if wanting better sound when a discrete GPU occupies the lone PCIe slot.
The package bundle contains the standard affair; a couple of SATA cables, and three manuals. The mainboard manual is actually very comrephensive and well written, which should help users get to grips with a new build easily.
Software
Gigabyte bundles an extensive range of software with their motherboards and the H55N-USB3 is no exception to the rule. We tried them all out, and most of them do work as intended. We’ve picked out a few to discuss our thoughts and findings below:
As the name suggest Smart 6 features six tools. Smart QuickBoot saves a few seconds in boot time, bypassing some of the hardware detection routines during POST. The second mode of this software simply engages S3 or S4 hibernation modes on normal power down, so it’s just a one-touch break out GUI, of something you could do via Control Panel Power Options in Windows 7.
Smart QuickBoost is a one-touch overclocking utility with three speed presets. The presets themselves do work, although the higher speed presets may not be ideal for every CPU. We found preset “3” worked fine on our i5-661, but was not stable with our i7-875K Lynnfield, which needs more voltage than the software applies.
SMART Recovery is a backup utility allowing user to setup backup schedules and to restore or copy files from one drive to another. Again, this is something that you can do via Windows 7 easily enough if need be, adding files and folders to a backup schedule as necessary.
SMART Dual BIOS is utility that allows users to save up to twelve passwords and small reminders (with a reminder schedule) to a location in the system BIOS. We’re not sure how much need there is for something like this, but the utility does work.
SMART Recorder is an admin level monitoring tool that records system events such as file access and system on/off events.
Finally there’s SMART TimeLock, which is a user account logon utility that allows limits to be imposed on individual computer accounts. A similar feature is built-in to Windows 7, so we can’t see much need for it.
OC Tuner allows on-the-fly adjustment of system busses as well as changes and monitoring of primary rail voltages. SMART QuickBoost is also built into this utility and offers the same feature as what you get in the Smart 6 version. Most of what is in OC Tuner works, the exception being a misreport of VTT we encountered on occasion. Setting 1.15V in BIOS is seen as 1.10V in OC-Tuner, we tried setting 1.15V in the software and found the scale reverted to 1.10V every time we pressed the “Set” button. It’s the only voltage step in the scale with this problem; you can set above or below 1.15V fine.
Dynamic Energy Saver 2, enables light load power savings by switching some of the VCC power phases off during light load conditions. This can help save a few watts of power on some motherboards, but does not do a lot for the H55N-USB 3 as the PWM circuit used for CPU VCC is three phase and does not use a high switching frequency – so switching losses aren’t that large to begin with . Custom tuning options are also available that allow underclocking BCLK by up to 30% in idle~light load scenarios, although we could not get this to work for us. The software prompted us to reboot as if we set the low power state option, but any changes made would not actually engage upon reboot. Either we’re missing something, or the software needs some work...
BIOS
Gigabyte’s BIOS is well laid out and easy to navigate. The MIT section is home to all overclocking related functions with individual sections neatly segregated and well arranged. Unlike other mini-ITX boards, Gigabyte provides access to almost every memory sub-timing for adjustment.
Voltage control is provided for CPU VCore, VTT, VDIMM, PCH and VAXG. The range for CPU VCore starts from 0.5V and extends out all the way to an insane 1.90V, which is more than anyone will realistically be able to use given this board’s intended audience. The low voltage options will certainly bring a smile to the face of ultra-low power enthusiasts and underclocking nuts. Most mini-ITX motherboards tend to skimp out on the low voltage stuff, so Gigabyte are creating some extra appeal for the H55N-USB by catering for such use.
Eight BIOS profile save locations are provided, as well as an option to save profiles to HDD or a USB drive. Again, these are the finer features you miss out on if you opt for a mini-ITX board from another vendor.
Fan control is one area where we’d liked to have seen more than what you get on the H55N-USB3. The CPU header can control four pin and three pin fans, but the system fan header cannot be controlled at all. CPU fan header control is a little limited in BIOS (Smart fan or disabled modes only, no direct temp scale controls), but you do get a very comprehensive software level control feature in Gigabyte’s OC Tuner utility.
A built in BIOS flashing utility called Q-Flash is available, making BIOS updating a breeze - you can flash a new BIOS from a USB drive or from a HDD.
One last thing worth mentioning; overclocking recovery on this board is excellent. Push things too far and the automated recovery routine will recover the board to POST in safe-mode, negating the need to clear CMOS when overclocking. We tried hard to create a non-POST situation by ramping bus freqeuncies way beyond stable limits and found the BIOS recovered every time. This rounds off the BIOS very nicely, with our only real complaint relating to the strange multiplier control issue on our i7-875K as mentioned in the summary section.
77 Comments
View All Comments
Rajinder Gill - Tuesday, June 15, 2010 - link
I've just searched the web and found reports of TV tuner cards working with the Intel DH57JG with a Clarkdale CPU. Hope this helps shed a bit of light. I'll get some PCIe cards in to help out with testing this end too.I will contact Gigabyte for you first thing. Which motherboard is it?
Regards
Raja
ajp_anton - Tuesday, June 15, 2010 - link
Motherboard: ga-h55m-ud2hTuner: pxdtv 2300h
Doesn't really matter to me now, I sold it and went for AMD instead.
Khenke - Tuesday, June 15, 2010 - link
Was planing to build an ultra compact gaming rig (and build a case my self) with this moderboard an i5 750 and HD5850. My aim was to OC the 750 to 3.8GHz and use the H50 to cool it, but thanks to you guys I now know I have to wait until Asus releases a mini-itx card and do it right.But what would be nice is if you could test any other cooling on it that fit (so we know if any coolers at all fit), preferably low profile coolers as I want my case no thicker than 12cm :)
Thanks for en excellent review.
Rajinder Gill - Tuesday, June 15, 2010 - link
If you're willing to do a bit of DIY, you can trim the mount of the H50 down a bit to fit the hole. Not ideal I know. I'll see if Gigabyte have a list of low-profile coolers that will work (or if they'll put a list together) - any updates and I'll post back here.-Raja
forumator - Tuesday, June 15, 2010 - link
Nice, would be great to have that info, thanks Rajinder.Khenke - Tuesday, June 15, 2010 - link
Ah. Thanks Raja.Since I'm planing to make an all aluminum 19x27x12cm (inner size so add max 1cm for the material) case a little work on the H50 wont be much of a problem :)
But I am very interested in a list with low-profile coolers too, since I could slim it down 1cm then.. :)
The H50 was the solution for a very bad placed cpu socket.
Been hunting some info on compatible coolers but with no luck so far.
I so want to get my gaming rig in a backpack..
Rajinder Gill - Tuesday, June 15, 2010 - link
Off the bat, anything push-pin will work. Not sure how many push pin type coolers there are that make any sense over the Intel cooler though.Anything with a screw clamp fitting will need to be assessed on a case by case basis, as there are also some SMT resistors and a couple of what look to be feedback compensation capacitors to the left of the hole (near the circled transistor). You really don't want to knock those off or damage them.
I'll ping GB in the morning and see if they want to put together a list for their homepage - I suspect a lot of people will appreciate the info. I only have a couple of old tower sinks and the H50 at hand, so I've either gotta scour around the web hoping I call it right, or enlist some help :)
-Raja
jaydee - Tuesday, June 15, 2010 - link
I am glad you posted results from "AutoCAD 2010 x64—Cadalyst 2008" with both the IGP and the discrete video card. Is there any chance we can see this benchmark on video card reviews (Ryan)? I'd be really interested in seeing a comparison of 3D benchmarks as well as games across the video card spectrum.forumator - Tuesday, June 15, 2010 - link
Would have liked more info on what aftermarket coolers will fit with a graphics card in the pcix slot...especially ones that would fit in a small case, this is a MITX board after alljaydee - Tuesday, June 15, 2010 - link
I would think that'd be way more dependant on the case, than it would be the motherboard.