1000W-1200W Roundup: Five High-End PSUs
by Martin Kaffei on December 9, 2010 1:20 PM ESTOCZ Z1000M Regulation
| +3.3V regulation | |
| Load | Voltage |
| 10% | +2.73% |
| 20% | +2.12% |
| 50% | +1.21% |
| 80% | -0.61% |
| 100% | -1.82% |
| 110% | -2.42% |
| +5V regulation | |
| Load | Voltage |
| 10% | +2.40% |
| 20% | +2.40% |
| 50% | +1.40% |
| 80% | +0.40% |
| 100% | -0.40% |
| 110% | -0.80% |
| +12V regulation | |
| Load | Voltage |
| 10% | +1.83% |
| 20% | +1.75% |
| 50% | +1.42% |
| 80% | +0.92% |
| 100% | +0.33% |
| 110% | +0.08% |
The +12V rail is very stable and always above 12.00V. Only the +3.3V could use better regulation, as it shows a voltage drop of more than 5.15% during our test from 10% to 110% load. +5V starts sonewhat high and ends 0.80% under the optimal value.
Ripple and Noise
| +3.3V ripple quality | |
| Load | Ripple and noise |
| 10% | 14.80mV |
| 20% | 18.40mV |
| 50% | 20.90mV |
| 80% | 28.50mV |
| 100% | 33.20mV |
| 110% | 35.30mV |
| +5V ripple quality | |
| Load | Ripple and noise |
| 10% | 20.90mV |
| 20% | 23.50mV |
| 50% | 27.90mV |
| 80% | 34.40mV |
| 100% | 42.60mV |
| 110% | 46.80mV |
| +12V ripple quality | |
| Load | Ripple and noise |
| 10% | 46.80mV |
| 20% | 57.30mV |
| 50% | 74.80mV |
| 80% | 90.30mV |
| 100% | 101.60mV |
| 110% | 118.30mV |
OCZ has some small transients on +3.3V, while +12V shows a high ripple, but they are all still within specifications. While technically satisfactory, the results certainly aren't great for a very expensive PSU. 118mV on +12V and 47mV on +5V are both very close to the 120mV and/or 50mV limit.
Facebook
Twitter
RSS
44 Comments
View All Comments
SirGCal - Thursday, December 9, 2010 - link
Ditto! I have bought nothing but Corsair powersupplies for quite some time. I got tired of my Antec supplies dieing out on me so I switched to some of the others (Seasonic) but once I found the new (at the time) Corsair's lineup... There was no competition. And generally speaking, I don't buy their ram or other products, but their power supplies are rock solid.Squuiid - Thursday, December 9, 2010 - link
+1Where's the Corsair?!
aandea - Thursday, December 9, 2010 - link
+1Where's the Corsair?!
Martin Kaffei - Friday, December 10, 2010 - link
Well, we can't test all brands out there, but we've already reviewed the AX 750, which is a very good PSU and this roundup wasn't the last one. I'm sure, Corsair will send more samples, if you are interested.landerf - Friday, December 10, 2010 - link
The AX 750 and the AX1200 are hardly comparable. You can't just assume by the model line, especially with corsair. They're not made by the same manufacturer. The AX is considered "god" tier at the moment, so it'd be expected to be in any such comparison.landerf - Friday, December 10, 2010 - link
Meant AX1200Havor - Friday, December 10, 2010 - link
Still the AX1200 belongs among the tested products as its the only one that is in the same range as the Antec High Current Pro 1200WJerricho24 - Friday, December 10, 2010 - link
I also have a few corairs and would have liked to see the AX1200 set along side the enermax Revolution 1250 or Galaxy 1000(that I also have both of)the REAL top end players seem to be missing from 1000W+ review.
Beenthere - Thursday, December 9, 2010 - link
...it's good to expose that some known and unknown brands have mediocre PSU quality. Now days you need to consider accurate PSU reviews on the specific model PSU you are considering purchasing as the quality and performance can vary drastically from one PSU model to another of the same brand.SirGCal - Thursday, December 9, 2010 - link
Even the Corsair CMPSU-1000HX or CMPSU-950TX would have been interesting in the mix. Let alone the AX1200 monster.But still, the majority of users who aren't running tripple SLI won't need anything more than a 600-900W unit depending. It would be more interesting to see a good comparison of say the ~750W range. That'll hold most systems even with two GPUs in many cases. But no problem at all with any single GPU as the majority of users run.