Like the client version of Lion, Lion Server is now a download from the Mac App Store, and as with Lion client this means that there are some changes in the installation process.

A server upgrade install from Snow Leopard Server is performed the same way as a client upgrade install - fire up the App Store, download the installer, and let it do its thing. If you’re running the upgrade from a Snow Leopard server, the App Store is smart enough to prompt you to buy the Server app if you haven’t already. You can also convert any Lion client install to a server install by downloading the Server app from the App Store, and then running it - it will download and install some additional components, and the next time you reboot your Lion client, it’ll be a server instead.

Don't make fun of my test server, okay?

Upgraders should note that OS X Server upgrades tend not to go as smoothly as their client counterparts, and the App Store reviews for Lion Server indicate that this hasn’t changed - if you haven’t already backed up all the data that’s important to you (including a full-disk backup of the hard drive, if you can), make sure you do it before you upgrade. I would recommend doing a clean install if you can, but your mileage may vary - just know that the more you’ve customized Snow Leopard Server, the more likely the upgrade is to break something.

Interestingly, Lion Server removes Snow Leopard Server’s requirement that the software be installed on a desktop Mac system - if, for whatever reason, you want to use a laptop as a server, you can do it without any workarounds. I would generally recommend against this except in light-use or home-use scenarios, since slow-spinning 5400 RPM drives and higher heat are going to give you less-than-stellar performance in workloads that require lots of disk usage - the ability to install Lion Server on a laptop is more useful for remote management of a desktop server, which we’ll talk a little bit about in the next section.
Introduction Server.app and the Server Admin Tools
Comments Locked

77 Comments

View All Comments

  • HMTK - Wednesday, August 3, 2011 - link

    OK so you can definitely run a Mac OS X vm on vSphere 5 but only on Apple hardware. What a joke! Probably Apple idiocy rather than a technical limitation.
  • Spazweasel - Wednesday, August 3, 2011 - link

    Apple is a hardware company. OS/X and iOS exist to make hardware sales possible (thus the cost of development is included in the pricing for Apple hardware, something the Apple haters conveniently overlook) Allowing the running of OS/X on non-Apple hardware reduces Apple hardware sales, so they don't do it.

    "Idiocy"? Yeah, sure, whatever.
  • HMTK - Wednesday, August 3, 2011 - link

    Not allowing Mac OS to run under a hypervisor on non-Apple branded hardware won't help them either. Or do you think a halfway decent IT-department would put a desktop machine or a hard disk posing as a server in a data center? They'd rather pay a few 100 € more for a license if they could run it on ESXi/XenServer/Hyper-V and reliable hardware.
  • Spazweasel - Wednesday, August 3, 2011 - link

    Apple makes its money on the desktop, not the server room. I doubt it's worth the effort. OS/X in the server room is a niche product, and Apple know it; it's much more suited as a workgroup/small office server, and those environments do not have ESX or Xen installations.

    Apple has no incentive to support OS/X in a VM, and plenty of reasons not to. Really, I don't see why this is a surprise.
  • HMTK - Thursday, August 4, 2011 - link

    I'm not saying it's a big surprise, I'm saying it's stupid. why not make good manegement tools for their iOS available in a way that companies can integrate better in their infrastructure?

    You might be surprised as to how many small shops are going the virtualization route. Even if you have only a single server it makes sense in the long run when the time comes to replace the hardware. Just import the VM on the hypervisor on the new hardware and you're done.
  • GotThumbs - Tuesday, August 2, 2011 - link

    This is an interesting article and I enjoyed the depth of detail. As a builder of my own systems for years, does the use of this software bind you to using only a ready built Apple system? It seems Apple is slowly trying to create a close proprietary system where you have to use apple hardware and apple software. I know their are hackintosh systems but it seems its still going to be quite a bit of effort and so far seems to be a waste of time for me. As the article mentions, there are lots of alternatives available. Apples MO seems to be offering zero options for using outside sources. Apple consumers are being channeled to Itunes and the Mac App Store for all purchases. I'm personally not a fan of that trend and have no intentions of bowing down to that kind of control. I can see where the general consumer who has very little technical knowledge is quite accepting of Apples controls as its a very simple and somewhat brainless system packaged in a slick looking package.
  • GrizzledYoungMan - Tuesday, August 2, 2011 - link

    Or is it still something we're all going to pretend works, when it very clearly doesn't out in the real world (If it worked, why would DAVE exist)? I'm referring here to the myriad of permissions issues and oodles of useless garbage sidecar files that pop up after a few days of operation in a mixed environment.

    Haven't read the article. Probably won't. Sorry. Apple is a joke at anything that designing anything that doesn't fit in your pocket/surrogate vagina of choice.

    I get this feeling, deep in my angry muscle, every time some imbecile waves around his iThing, raving about Apple's genius, while I'm thinking about all the time that has been wasted trying to get OS X desktop clients to do things that have worked out in the real world for years now.
  • blueeyesm - Tuesday, August 2, 2011 - link

    Not in Lion, as Samba moved to GPL3 licensing.

    http://www.appleinsider.com/articles/11/03/23/insi...
  • GrizzledYoungMan - Tuesday, August 2, 2011 - link

    You know what's wild? I should actually be excited they're moving to a new standard - the NAS' I often recommend to clients support SMB2, and see useful performance gains from it.

    But then I read "Windows networking software developed by Apple" and my heart sinks. Realistically, what are the odds this is going to work?

    Honestly, I don't really blame the design teams over there so much as a closed corporate culture that both ignores the feedback of their customers and denies any complaints exist.

    They're really missing out on the sorts of improvements that most big software developers make using the information gathered during large, open betas and the like.
  • repoman27 - Tuesday, August 2, 2011 - link

    As the article you linked to points out, since version 10.2 Mac OS X has shipped with Samba, an open-source, reverse engineered version of SMB 1.0. With Lion, Apple dropped Samba and added native support for SMB2 while maintaining the ability to connect with SMB 1.0 machines as long as they use UNICODE and extended security. This means Mac OS X 10.7 can no longer connect out of the box with some SMB 1.0 or Samba machines (which it had done for the last 9 years), but it does have full support for SMB2.

    As for GrizzledYoungMan's "oodles of useless garbage sidecar files," it's not like Mac users have any use for a thumbs.db file either. Just hide the metadata files, or don't allow write permissions on the folder if you don't want to see that kind of stuff, but these types of files are most likely only going to become more prevalent as time goes by.

Log in

Don't have an account? Sign up now