Testing Methodology

For testing ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.

Full ATX Test Configuration
CPU Intel Core i7-875K
(95W TDP, tested at stock speed and overclocked to 3.8GHz @ 1.38V)
Motherboard ASUS P7P55D-E Pro
Graphics Card Zotac NVIDIA GeForce GTX 580 (244W TDP)
Memory 2x2GB Crucial Ballistix Smart Tracer DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD
Western Digital Caviar Black 1TB SATA 6Gbps
Samsung 5.25" BD-ROM/DVDRW Drive
CPU Cooler Zalman CNPS9900 MAX with Cooler Master ThermalFusion 400
Power Supply SilverStone Strider Gold 750W 80 Plus Gold

A refresher on how we test:

Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.

Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.

For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the IN-WIN BUC.

Last but not least, we'd also like to thank the vendors who made our testbed possible:

Thank You!

We have some thanks in order before we press on:

Assembling the Fractal Design Define R3 Noise and Thermal Testing, Stock
Comments Locked

83 Comments

View All Comments

  • icebox - Friday, November 11, 2011 - link

    Thanks. I suppose the Q6600 generates quite some heat by itself? Since a fusion /atom board would be cool enough and I have wd green drives for the build it should work quite nice than.

    Thanks for the detailed info.
  • slacr - Friday, November 11, 2011 - link

    Yes, it runs at ~60-80W i'd assume, on slightly lower voltage than stock.

    The entire system consumes 100-120W measured at the socket. To clarify, the front fans slot in between the drive cage and the front of the case and do not affect the space for disks. It should work fine with lots WD GP-drives.
  • Peskarik - Friday, November 11, 2011 - link

    I have this case since 2 days.
    There is space for 2 intake fans independent of number of drives you put in. Moreover you have a hole at the bottom, a hole on the left side, two holes on the top = building well-cooled (but maybe loud) machine is no problem.
  • j-g-faustus - Friday, November 11, 2011 - link

    I'm using this case for a home server with ten HDD (using all eight 3.5" and both 5.25" bays) and a i7 920, it works very well.

    I had to experiment a bit with cooling, but with a few extra fans it is both cool and quiet.

    More detail here: http://www.silentpcreview.com/forums/viewtopic.php...
  • TerdFerguson - Friday, November 11, 2011 - link

    "odds are you're not going to be fitting an AMD Radeon HD 6990 or ASUS Mars II in here, but if you can afford either of those, why are you buying a $100 case?"

    Are you really that out of touch with reality? A computer case, to many, is a plain metal box that sits tucked away under a desk. Being able to accommodate a slightly larger than average graphics card does not alone justify a huge price bump.

    You guys are quick to do teardowns of every Apple or Amazon branded product you can get your hands on, why don't you do some on high-end computer cases and motherboards. Please, please, please, show us where all the extra money is being converted into value. I would be very interested in hearing how profit margins scale against unit price. Until that's been done, please stop coming off as a snobby douche-bag by insinuating that a case that costs less than $100 is inappropriate for housing a high-end graphics card.
  • Dustin Sklavos - Friday, November 11, 2011 - link

    Did you not read my review?

    In my experience, the only place you're going to find both silence AND cooling performance in an enclosure is north of the $150 mark or so. I've been testing these for the better part of the last year and the fact is, depending on your priorities, you DO get what you pay for by spending up on something like SilverStone's FT02, Antec's P183, or Thermaltake's Level 10 GT.

    Or you could just insult me. You could do that, too.
  • JarredWalton - Friday, November 11, 2011 - link

    Thanks for the reply, Terd, but are *you* that out of touch with reality? The number of people who buy/own the 6990 and/or Mars II is so trivially small that what we're saying is the <0.01% of users who own one of those products will want a larger case and aren't interested in a $100 enclosure.

    Let's see... $700+ on the graphics card, $200+ for a PSU to run the cards, and certainly you'd want a good motherboard and CPU in there. But after all that, you seem to think people would go for a $100 "box of steel" to put it in. I've got a 5870 CrossFire setup myself, and originally had it in a Lian Li case that's similar in some ways to this; I upgraded to a Silverstone case and a different motherboard purely to make the system run cooler and better. You want to run something like that in the Fractal Design, sure, you can do it; you can even do GTX 580 SLI. But if you're after an HD 6990 (http://www.newegg.com/Product/Product.aspx?Item=N8... or a crazy-extreme Mars II (like this one: http://www.newegg.com/Product/Product.aspx?Item=N8... I'm pretty sure this case isn't in contention for the rights of holding everything.
  • JonnyDough - Saturday, November 12, 2011 - link

    Jarred, I believe that many people have spent a lot on their essential components and not had much left over for a case. Its one area where I would personally be willing to cut corners. $100 will get me more than a suitable box. Just because I may want a fast PC (My Opteron 185 was once bleeding edge), does not mean I need to invest a lot in a case and I believe there are many sensible people who would share that sentiment.

    I have spent $400 on a graphics card before. I don't know why anyone would though, when you can simply wait a year and buy a $180 graphics card that outperforms it. Seems like that $200 could make me an extra $200 by the time I retire, and then I'd be happy to say I saved up to $400 by waiting a year and going lower-end. Computers today are "fast enough" and just because you can't play the latest titles does not mean you won't have solid, tested, cheap entertainment. I know capitalists would like to push sales, but we already live in a debt/slave society. The logical mathematics of it point to the idea that people willing to spend that much on a new system are not good stewards of their money.
  • 7Enigma - Thursday, November 17, 2011 - link

    I agree completely with your first statement (I as well looked for a cheap well performing case for both myself and my dad's gaming rigs). The Antec300 in my dad's system is INCREDIBLE for the money. I believe I spent $35 after a 30 rebate or something, WITH free shipping from Newegg, and with a moderate system (core i5 not OC'd, 5850) it is virtually silent with fantastic airflow. Same with my personal gaming system which was a $50-70 sTitan case which similarly performed very well while remaining pretty quiet.

    I guess a lot of people constantly are modding their systems but for me it's pretty much build it and occasionally take it outside to air compressor clean it, but it stays like that until the next build. So I don't really care if the build itself is a bit difficult, or the case isn't fancy (sits under my desk), it just has to perform well, have good cable routing options, and be inexpensive.

    I have no clue, though, where you go off on the second paragraph tangent about our society.
  • Calin - Friday, November 11, 2011 - link

    "but they've driven south the price of acoustically optimized cases"

    Is that in Mexico, Honduras, or maybe even Argentina?

Log in

Don't have an account? Sign up now