Assembling the Fractal Design Define R4

Much as with the Define R3, Fractal Design takes a few cues from Corsair in the ease of assembly arena. Despite having been under the weather with tension headaches and a stomach bug this week, the Define R4 was still pretty easy to put together.

Fractal Design doesn't include the convenience of pre-mounted motherboard standoffs, but it has all of the necessary mounting points for Mini-ITX, ATX, and large Micro-ATX boards like the one we use in our testbed. The I/O shield snapped in easily enough, and the motherboard went in without any real trouble. Vertical clearance is a little crunched (hence my reservations about using a 240mm radiator in the R4), but this is also a relatively small case compared to some of the monsters I've tested recently. The R4 really is a mid-tower or as most users would say, "reasonably sized."

Installing drives in the R4 is relatively easy, too. Fractal Design doesn't go the toolless route anywhere, but that may be to minimize vibration. There are silicone grommets on the drive trays for mechanical drives, and 2.5" drives just screw in directly to the bottom of the trays. These trays are designed primarily for bottom-mounting drives but there are a pair of holes in the sides for the oddball device that won't mount that way (like our Corsair Link unit). The drive shields for the 5.25" bays also lock in and pop out easily; they use a small lever you can lift with your thumb as a locking mechanism.

Expansion cards and the power supply are basically the same story. The expansion slots use thumbscrews as is de rigeur, while the power supply mount has padding behind and below it. Nothing entirely notable here, although it's worth mentioning again that the eighth expansion slot is positioned laterally above the seven and intended for adding ports or whatever other accessories might fit there. Doing this saves on the height of the case, but in the process it does crunch the space between the power supply and bottom of the motherboard some.

Where things start to go a little topsy turvy is with cabling. The rubber-grommet lined holes in the motherboard tray seem a little on the small side, which can be a minor inconvenience. I was disappointed to see Fractal Design still hasn't really fixed one of my big problems with the R3, though: the AUX 12V routing hole above the motherboard. They increased the space between the back of the motherboard tray and the the right side panel, but that doesn't change the fact that the AUX 12V line routing hole is essentially parallel to the panel rails. In the R3 I just plain couldn't use the hole, while in the R4 I could shimmy the cable through with a little effort. This still feels like a big oversight that needs to be corrected somehow, though. Fractal Design may want to consider switching over to a hinged side panel mounting design for the next revision to clear this gap.

By and large, though, assembly was pretty easy and I can't complain too much outside of the cabling snafu. What's worth pointing out is that the R4 does not feature an IDE indicator LED despite having space for one. The LEDs surrounding the power button and breaking the center of the front door are power indicators only. This is an unusual omission that doesn't affect the usability of the case too much (many notebooks these days don't include IDE indicators either), but it's worth mentioning.

In and Around the Fractal Design Define R4 Testing Methodology
Comments Locked


View All Comments

  • mtoma - Friday, July 20, 2012 - link

    I doubt that such a fan cover exists. But I wonder, only the 2 top vents on the P280 are responsible for the weaker acoustical performance comparing to the Define R4? If not, on what ground Dustin Sklavos said that the acoustical performance in Define R4 is better that P280? I know he changed the testing methodology, but... how can we compare our favorites?
  • surt - Friday, July 20, 2012 - link

    It looks deep enough, but I take it lacks the mounts for EATX?
  • Grok42 - Sunday, July 22, 2012 - link

    I'm curious, what are your reasons for using an EATX motherboard? Is it memory capacity? Followup is why you want to put it in a mid-tower case. I'm not judging, criticizing, complaining or anything, just wanting to know.
  • gamerdad - Friday, July 20, 2012 - link

    I got an R3 last year on the strength of its reviews on this site and elsewhere. Love the rig in general, but I do have one complaint. The power button is big, round, friendly, accessible and has a pretty light around it that just calls out its seductive siren song. "Push me," it cries.

    Which my toddler loves to do.

    So now I have a garish taped-down cardboard flap over the power button. Next time, I'm getting a case with the buttons behind the front door.
  • makken - Friday, July 20, 2012 - link

    Why not just set the power button to "do nothing" under power settings?
  • gamerdad - Friday, July 20, 2012 - link

    You can do that? (looks it up...) Sure enough, you can do that! Thanks.
  • Flying Goat - Saturday, July 21, 2012 - link

    Another option is to turn off the light on the power button. This is what I do, since it's too bright for my tastes, though I do kinda miss having an indicator that my PC is on.
  • UNHchabo - Monday, July 23, 2012 - link

    I have an R3, and I hooked up the LED to the HDD LED leads; the LED is too bright for me too when it's constant-on, but I think it works great as an HDD light.
  • chrislue - Monday, August 13, 2012 - link

    R4 does not have a HDD led?
  • danjw - Friday, July 20, 2012 - link

    You don't mention the distance between the top of the case and the motherboard, it would be useful in evaluating if a radiator there is actually feasible.

Log in

Don't have an account? Sign up now