Quality Testing

In order to test the quality and consistency of a keyboard, we are using a texture analyser that is programmed to measure and display the actuation force of the standard keyboard keys. By measuring the actuation force of every key, the quality and consistency of the keyboard can be quantified. It can also reveal design issues, such as the larger keys being far softer to press than the main keys of the keyboard. The actuation force is measured in Centinewton (cN). Some companies use another figure, gram-force (gf). The conversion formula is 1 cN = 1.02 gf (i.e. they are about the same). A high quality keyboard should be as consistent as possible, with an average actuation force as near to the manufacturer's specs as possible and a disparity of less than ±10%. Greater differences are likely to be perceptible by users.

The machine we use for our testing is accurate enough to provide readings with a resolution of 0.1 cN. For wider keys (e.g. Enter, Space Bar, etc.), the measurement is taking place at the center of the key, right above the switch. Note that large keys generally have a lower actuation force even if the actuation point is at the dead center of the key. This is natural, as the size and weight of the keycap reduces the required actuation force. For this reason, we do display the force required to actuate every key but we only use the results of the typical sized keys for our consistency calculations. Still, very low figures on medium sized keys, such as the Shift and Enter keys reveal design issues and can easily be perceptible by the user.

The quality testing of the Cherry MX Board 6.0 gave us unnaturally good results, smiting every other mechanical keyboard that we have tested to this date - including those made with Cherry's own switches. Our instruments recorded an average force of 43.5 cN, with a disparity of just ±1.61% for the main keys. Even the force of the larger keys is abnormally close to that of the smaller keys, as their force figures are usually significantly lower due to the size of the keycap.

Although this is just an assumption on our part, we believe that these abnormal figures are a product of more than just the lack of variability in Cherry's mechanical switches. Our testing equipment is set to hold the force value once a key has been actuated, but it can only realize that it has actually been actuated once the keyboard sends a signal to a computer. Inherently, this process has a latency of a few milliseconds, during which the analyzer keeps increasing the force. Cherry claims that with the Realkey technology of this keyboard, it can signal the system every single millisecond. Again, this is a mere educational guess on our part, but it may be that Cherry effectively minimized the latency of the keyboard, which is now signaling our test system to stop more consistently. This could explain the abnormal consistency of the results, as a latency of even a few ms would increase every recorded value slightly.

The Cherry MX Board 6.0 Keyboard Final Words & Conclusion
Comments Locked

72 Comments

View All Comments

  • JohnMD1022 - Saturday, February 13, 2016 - link

    IBM Model M, Part number 1391472.

    They can be found on ebay, but are pricey.

    I have 2, a 1987 and a 1991, that we recently retired for Razer Blackwidow Tournament keyboards.
  • BrokenCrayons - Wednesday, January 27, 2016 - link

    As far as expensive keyboards go, this one has several things going for it such as a magnetically removable wrist rest (those plastic clip-on models are such a pain to remove) and the look is a lot less crazed than other backlit keyboards that end up looking a little like a rainbow threw up on a vampire goth wannabe.

    The problem really is price and practicality though. Keyboards can be purchased for around 1/20th of the price and honestly, I just can't see these making typing an e-mail or holding down the W key to walk forward a 20x better experience. We're talking about a keyboard that costs $200, which is the price of an entire laptop, but minus the computing guts, battery, screen, and useful software needed to process data. Plus, carrying an extra keyboard around when the computer already has one attached seems a little bit unnecessary (and I don't think this has bluetooth so you can use it with a tablet). Maybe just a number pad would be good in the event the computer doesn't have those or forces you to use a function key to access numpad capabilities would be a better idea, but it'd need to sell for around $5-ish for it to achieve any sort of volume sales.
  • Friendly0Fire - Wednesday, January 27, 2016 - link

    To be fair, that $200 laptop will fall apart in 6 months and will feel horrible the whole time it's still technically working.

    Those mechanical keyboards can last for a decade and feel great the whole time.
  • BrokenCrayons - Wednesday, January 27, 2016 - link

    I haven't had a 6 or less month failure rate with inexpensive laptops. In fact, a netbook I purchased in 2009 is still working nicely. I've traveled quite extensively with it and for several years, it's been my primary computer. A couple of months ago, I finally moved onto an HP Stream 11 backed up by an Asus X205TA, but my ancient netbook still has a place on my desk.

    I've killed a few other budget laptops here and there. There was a Samsung n150 that stopped powering on after 2.5 years and a Dell Insprion Mini 10 that I got rid of because the power connector was intermittent after 3 years. However that's a much longer lifespan than 6 months and this keyboard is pretty useless without being connected to one of those netbooks or some other PC so I still call into question the actual value of something priced that high. $50 is a much more reasonable price for something like this and that's pushing the value proposition pretty hard.
  • Murloc - Wednesday, January 27, 2016 - link

    those netbooks that came with XP (idk if that's 2009 or not) were always very slow and a pain to use.
  • BrokenCrayons - Thursday, January 28, 2016 - link

    Mine originally shipped with XP. It was and still is a slug where performance is concerned. I moved it off Windows and onto Linux a long time ago, but there are very significant limitations that I think would upset a lot of people. Video playback of Youtube content above 360p is unreasonably slow and even 360p is pushing it to the point where frames are dropped with regularity. Even with a good ad blocker and noscript, web sites sometimes take a few moments to become responsive (Amazon, Outlook, E-Bay, I'm talking about you clowns) so it'd be intolerable for most people. I'm patient though and I mostly use that netbook for writing and some lightweight gaming (DOSbox emulation of Master of Orion 2 and TES Daggerfall plus some 2D native linux games like The Unreal World and NeoScavenger) so the majority of my time is spent on tasks that don't really put a lot of pressure on it's old single core Atom CPU. Of course, none of that is really relelvant to the fact that it's still working properly after all this time despite being built from the cheapest parts money could buy at the time rather than having died after 6 months as a previous person asserted.
  • jbrizz - Wednesday, January 27, 2016 - link

    I've had few Logitech keyboards and the keycap/hole that the keycap goes into starts to wear meaning there is a small amount of play in the keycap. This allows the keycap to tilt which makes it bind. So after a few years Logitech rubber dome keyboards can start to feel like shit. I have not noticed the problem on my MS keyboard at work though, so might just be related to the cheap plastic Logitech uses.

    My mechanical keyboard with Cherry MX browns will probably always feel like new, which was also significantly nicer than any rubber dome keyboard ever was.
  • BrokenCrayons - Wednesday, January 27, 2016 - link

    That's a perfectly fair argument until you factor in the price. Suppose you purchase a rubber dome keyboard. Let's use the Microsoft Wired Keyboard 200 from Amazon priced at $10 and assume you're not a Prime member so you'll absorb another $5 in shipping, putting the total cost of each keyboard at $15. For the price of one Cherry MX Board 6.0, you can purchase 13 of these other keyboards. If each lasts two years, then you're in new keyboards for 26 years for the about the same price. Even with good manufacturing quality, the keyboard in this review is unlikely to survive that long. Yes, it's likely you'll get a lot more time out of it, but while you're plugging along with a tired, old Cherry, someone else will have a 1-2 year old rubber dome keyboard and never have to deal with such problems. Spill a drink on your Cherry keyboard? Uh oh! Spill a drink on your $10 keyboard. So what, I have 8 more of them laying in my "equal to Cherry MX Board 6.0 price" pile so I'll just grab another.
  • kent1146 - Wednesday, January 27, 2016 - link

    You are correct that buying a bunch of inexpensive rubber-dome keyboards is more cost-effective than buying one mechanical keyboard. But people don't buy mechanical keyboards for durability. They buy mechanical keyboards for typing / gaming keyfeel. The durability aspect is a secondary benefit.

    Your argument would be equivalent to saying:
    * I can buy a new 2016 Toyota Camry for $30,000. It would probably last me 10 years.
    * I can buy a 2003 Ford Focus for $1,500. If they last for 1 year each, and I just junk the car after it develops problems in 1 year, then I would have "saved" money by having my car-money last for 20 years.

    Makes economical sense, right? Sure. Except for the fact that you're stuck driving a 13-year old Ford Focus for the next 20 years, instead of a decent mid-range car like a Toyota Camry.
  • BrokenCrayons - Thursday, January 28, 2016 - link

    These are keyboards, not cars so the comparison is pretty far fetched with the only thing going for it being a similar price-to-price ratio. I frequently have to remind a certain dear little spouse of mine that not everything is reasonably compared to a vroom-vroom. :) Besides that, I'm comparing a new keyboard to another new keyboard so if you really wanted to get more accurate in ratio, you'd have to use a new base automobile, not a used one, and compare it to something that's also new and costs about the same amount more than the Microsoft El Budgeto 200. In the case of an economy car that'd sell for $15k new, then the comparable car would not be a "decent mid-range" one but something that retails for $200k. However, doing so would make the usual compare it to a car argument tilt vastly in favor of my original claim and not support whatever point you're getting at so I see why you really wanted to being the second-hand variable into this.

    Anyway, to humor you a bit, the advantage of driving one transportation appliance over another isn't measurable in tangible terms. As long as you end up at your desired destination, the point of a car is accomplished. The other things a car imparts are emotionally driven. The idea that you feel better about your drive or look better in other peoples' minds when they see you and so forth are all secondary feelings. If those emotions are worth the cost of admission for a particular person, then sure, go for it. In the same sense, go buy a $200 dollar keyboard and feel better about your computing at an emotional level. To argue that it imparts a measurable advantage that is aligned to its cost increase over the cheapest keyboards available is misguided though.

Log in

Don't have an account? Sign up now