The introduction of four bit per cell (QLC) NAND flash memory continues with Samsung's launch of their first consumer SATA SSD with QLC NAND. The new 860 QVO establishes a new entry-level tier in Samsung's highly successful SSD product family. Unlike previous low-end offerings like the 750 EVO and the plain 850, the 860 QVO is getting a broad release and is here to stay.

Samsung 860 QVO: Koo-vo?

The Samsung 860 QVO is the first of a new wave of SATA SSDs that should be able to beat the prices on even DRAMless TLC-based SSDs thanks to the increased density of QLC NAND—and the 860 QVO itself is equipped with a full-size LPDDR4 DRAM cache.

Samsung 860 QVO Primary Specifications
Capacity 1 TB 2 TB 4 TB
Form Factor 2.5" 7mm SATA
Controller Samsung MJX
NAND Flash Samsung 1Tb 64L 3D QLC
DRAM (LPDDR4) 1 GB 2 GB 4 GB
Sequential Read 550 MB/s
Sequential
Write
SLC Cache 520 MB/s
QLC 80 MB/s 160 MB/s 160 MB/s
Warranty 3 years
Write Endurance 360 TB
0.3 DWPD
720 TB
0.3 DWPD
1440 TB
0.3 DWPD
MSRP $149.99 $299.99 $599.99

Samsung's consumer SATA product line now consists of the 860 QVO, 860 EVO and 860 PRO. The 860 QVO, EVO and PRO all share a common hardware platform based around Samsung's MJX SSD controller and their 64-layer 3D NAND, with the product tiers differing primarily in the number of bits stored per flash memory cell.

The 860 QVO, from the box, is given a write endurace rating equivalent to 0.3 Drive Writes Per Day (DWPD), which even for the 1TB means 300GB a day, every day, which goes above and beyond most consumer workloads. Pricing is set to run at $150 for the smallest 1TB model, up to $600 for the 4TB model, making an equal cost per GB for the full range. It should be noted that the introductory MSRPs for the 860 QVO are not that aggressive in comparison to the record-setting sales we've been seeing on TLC SSDs recently.

MLC vs TLC vs QLC: Why QLC Matters

Two bit per cell MLC as used in the 860 PRO is now quite rare in the consumer SSD market and almost entirely absent from current enterprise SSD, having been largely replaced by three bit per cell TLC as used in the 860 EVO. With each increase in bits stored per cell, performance and write endurance decrease as SSDs need to be more careful to correctly discriminate between voltage levels, now up to 16 for QLC NAND.

While controller advances and other NAND process improvements (especially the switch from planar to 3D NAND) allowed TLC to overcome almost all of its disadvantages relative to MLC, QLC NAND is not expected to do the same. Early projections for QLC NAND called for at most a few hundred program/erase cycles, which would produce drives that would require careful treatment with workload that treated the storage more or less as a write-once, read-many (WORM) media. As QLC got closer to mass production, the story shifted and it became clear that QLC NAND would have adequate endurance for use as general-purpose storage.

Intel and Micron were the first to ship their QLC NAND, initially in the Micron 5210 ION enterprise SATA SSD and then in the Intel 660p and Crucial P1 consumer M.2 NVMe SSDs. The 660p and P1 introduced QLC NAND to the consumer SSD market, but as NVMe drives they still carry a price premium over SATA SSDs. However, as mentioned above, the introductory MSRPs for the 860 QVO are not at all aggressive in comparison to the record-setting sales we've been seeing on TLC SSDs recently. Those sales are not due entirely to the holiday season—flash memory prices in general have been crashing now that everyone has their 64-layer NAND in full mass production while PC and smartphone sales have been slowing. Meanwhile, rumors indicate that yields on QLC NAND have been poor, so the true cost is close to that of TLC instead of reflecting the ideal 25% discount per-GB.

Samsung 860 QVO Secondary Specifications
Capacity 1 TB 2 TB 4 TB
DRAM (LPDDR4) 1 GB 2 GB 4 GB
SLC Cache
Size
Min 6 GB 6 GB 6 GB
Max 42 GB 78 GB 78 GB
Sequential Read 550 MB/s
Sequential
Write
SLC Cache 520 MB/s
QLC 80 MB/s 160 MB/s 160 MB/s
Random
Read IOPS
QD1 7.5k (SLC)
4.4k (QLC)
QD32 96k (SLC)
36k (QLC)
97k (SLC)
60k (QLC)
Random
Write IOPS
QD1 42k (SLC)
21k (QLC)
42k (SLC)
38k (QLC)
QD32 89k (SLC)
21k (QLC)
89k (SLC)
40k (QLC)
89k (SLC)
42k (QLC)
Power Read 2.1 W 2.3 W 2.3 W
Write 2.2 W 3.1 W 3.1 W
Idle 30 mW 30 mW 30 mW
DevSlp 3 mW 3.5 mW 7 mW

The two main shortcomings of QLC NAND relative to the more mainstream TLC NAND are in write performance and write endurance. Both problems can be alleviated by the use of more NAND total, allowing writes to be spread across more NAND dies in parallel. That and the (hopes of) lower prices make QLC NAND best suited for large capacity SSDs. Thus, the 860 QVO product line starts at 1TB. Even at that capacity, the 860 QVO only needs 8 dies of QLC NAND and can only sustain writes at 80 MB/s. That means that the SLC write cache on the 860 QVO is even more important than for TLC SSDs. When working within the cache, the 860 QVO can saturate the SATA link with random or sequential writes. The cache functions much the same as the SLC cache on the 860 EVO, with a capacity that varies from a minimum of 6 GB when the drive is relatively full, up to 42 GB on the 1TB model or 78 GB on the 2TB and 4TB models. The Intel and Crucial consumer QLC drives also feature variable-size SLC caches but with much higher limits on the maximum cache size and a policy of retaining data in the cache until the drive needs the extra space. By contrast, the 860 QVO seems to take a more typical approach of aggressively flushing the cache during idle time in order to prepare for future bursts of write activity.

The performance specs for the 860 QVO when operating out of the SLC cache are typical for a mainstream SATA SSD. After the cache is full, performance drops significantly, with sequential writes showing the most severe effect. Power consumption is also comparable to Samsung's other recent SATA SSDs, with the 1TB model requiring a little over 2W at peak and the larger models drawing just over 3W during writes. The 2TB and 4TB models have very nearly identical performance and power ratings, indicating that 2TB of QLC is sufficient to populate all the NAND channels of the MJX controller.

The warranty and endurance ratings for the 860 QVO are the other clear area where the use of QLC NAND has its impact. The 860 QVO's warranty period is three years, typical for low-end SSDs but shorter than the 5 years that the 860 EVO and PRO carry. Write endurance is rated for 360 full drive writes, or 0.3 DWPD for the duration of the 3-year warranty. This is comparable to some of the cheaper TLC drives currently on the market, and in terms of total bytes written the 860 QVO's rating is about 80% higher than the Intel 660p and Crucial P1, despite those NVMe QLC drives having the advantage of a five-year warranty.

The 860 QVO's case follows the same basic design as Samsung's other recent SATA SSDs, but is painted dark gray instead of Samsung's traditional black. Internally, the 1TB 860 QVO illustrates how comically oversized even the 2.5" drive form factor is compared to the requirements of modern consumer SSDs. The PCB features three main BGA packages: the DRAM, the controller, and the stack of eight 1TB QLC dies. There's an empty pad on the back that can accommodate another NAND package. Samsung commonly packages up to sixteen NAND dies together, so even the 4 TB QVO may be able to get by with this same small PCB—placing DRAM becomes the more important problem. Samsung states that their current MJX controller supports up to 8TB SSDs, but there's clearly very little demand for consumer SSDs in that capacity yet. The 2.5" form factor itself can now accommodate at least 16TB, or 32TB if two PCBs are stacked in a 15mm thick drive. These capacities may show up in enterprise products, but are probably still several generations away from hitting the consumer SSD market.

Samsung has not announced a M.2 version of the 860 QVO, but that's clearly possible if the demand is there. They can probably fit even the 4TB 860 QVO onto a single-sided 80mm M.2 card.

Samsung 860 Family
Price Comparison
Capacity NAND 250GB
256GB
500GB
512GB
1TB 2TB 4TB
860 QVO
(MSRP)
QLC N/A
-
N/A
-
$149.99 (15¢/GB) $299.99
(15¢/GB)
$599.99
(15¢/GB)
860 EVO TLC $55.99 (22¢/GB) $72.99
(15¢/GB)
$127.98 (13¢/GB) $294.88
(15¢/GB)
$797.99
(20¢/GB)
860 PRO MLC $97.00 (38¢/GB) $147.00 (29¢/GB) $284.99 (28¢/GB) $577.99 (28¢/GB) $1179.99 (29¢/GB)

The launch MSRPs for the 860 QVO do not compare favorably against SATA SSDs already on the market. The 860 EVO is currently below the QVO's 15 cents per GB at 1TB and 2TB capacities, and plenty of other mainstream TLC drives are priced similarly. Samsung currently has no competition in the 4TB SATA SSD space, so their 4TB 860 EVO is substantially more expensive per GB, leaving appropriate room below for the 860 QVO. In order to be a strong competitor in the consumer market, the 860 QVO really needs to priced at no more than 13 cents per GB, and that limit is liable to come down further over the next several months as flash memory prices continue to drop and QLC yields improve.

A Note on Our Testing: The Occasional Drive Failure

Samsung provided us with samples of the 1TB and 4TB 860 QVO. Testing the 1TB model went smoothly, but the 4TB 860 QVO has run into some problems causing the drive to disappear from the system interface. These issues are most noticeable when hot-swapping the drive, which is a regular part of our SATA SSD testing routine. There have also been challenges getting the 4TB drive recognized by a motherboard during the boot process, and this causes the boot to stall indefinitely on some of our systems.

It should be noted that our testing regime is fairly streunous, and we sometimes get drive failures. It happens, and only a few of them are ever drive specific. 

As a result, these problems do not appear to be specific to the 860 QVO or its use of QLC NAND and have been replicated on both the 4TB 860 EVO and 4TB 860 PRO with multiple host systems, but have not occurred with any of the smaller 860s. The 3.84 TB 860 DCT and the 4TB 850 EVO have also been trouble-free, so this isn't a problem with 4TB SSDs in general. We are still working with Samsung to determine the scope and nature of these issues with the 4TB drives, and it is not yet clear whether there is a general compatibility problem or if our testing procedure has triggered a firmware bug that put our samples permanently into an uncooperative mood.

Because of these issues, some benchmark results for the 4TB drives have been delayed. Performance and price notwithstanding, I am unable to recommend any of the 4TB 860 series SSDs until I have a better understanding of the nature of the problems.

The Competition

There are no other consumer QLC SATA SSDs on the market yet, though ADATA has announced their SU630, which will feature alarmingly low capacities. The Intel 660p and Crucial P1 are the only other consumer QLC SSDs currently available, but they are priced for the NVMe market. Most of the competition for the 860 QVO will come from SATA SSDs with TLC NAND, both entry-level models with DRAMless controllers (eg. Toshiba TR200) and more mainstream models like the 860 EVO, Crucial MX500 and WD Blue. Almost all SATA SSD product lines feature a 1TB class model, but there are still relatively few 2TB models and no 4TB competitors have been announced. This will likely change as other QLC drives come to market, and even 2TB TLC drives have been getting more common this year.

AnandTech 2018 Consumer SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1709
Linux kernel version 4.14, fio version 3.6
Spectre/Meltdown microcode and OS patches current as of May 2018
SLC Cache Sizes & Energy Consumption
Comments Locked

109 Comments

View All Comments

  • 0ldman79 - Saturday, December 15, 2018 - link

    I found some answers to that question on the Bench.

    https://www.anandtech.com/bench/product/2339?vs=22...

    Load time, file copy times, etc, I guess more day to day testing would be appreciated. The spinner does a decent job on the BAPCo tests.

    I'm wondering if the QLC will really improve my load times vs my 2TB mechanical drive that sustains nearly 200MBps read speeds in practice.
  • ewitte - Thursday, March 28, 2019 - link

    Who in their right mind would purchase a QVO drive when the EVO is similarly priced? These drives perform poorly and have horrible longevity. 160MB/s writes after the cache!!!! I will not even touch the smaller EVO drives because the write speed is so low (500GB is ok but 1TB is so affordable now it is my minimum).
  • Sanmayce - Friday, March 29, 2019 - link

    Anand, please consider debunking the myth of data retention being limited to a few months.

    Really, where this myth originates from, f.e. if one buys QVO for backups what is the safe-time-between-losing-data?

    My proposal is to fill the drive with 900GB 7z archive and test the integrity after, say, 6 months.

    I myself am planning to buy the 1TB QVO just to find how durable it is under superheavy REAL-WORLD random read/writes - QD1. By the way, you are using 16GB spans in your tests, but the SLC is bigger than that, don't you see a problem?
  • bobhumplick - Thursday, May 16, 2019 - link

    so if the intel 660p and the smasung qvo are the same price which one do you get?
  • praveenvj - Friday, July 26, 2019 - link

    Now that price has dropped to $400 for 4TB, does this make sense compared to EVO for daily driver PC?
  • southleft - Monday, August 19, 2019 - link

    Here we are about 9 months later - August 2019 - and the price of Intel's 660p 1TB model has dropped by 50% when it's on sale. So, for $85 - $95 you can get an NVMe drive with, say, 750GB of usable capacity and it will blow all of these SATA SSDs out of the water. In other words, if you don't fill the drive over about 75% full you'll have a smokin' fast rig.
  • problemchild - Wednesday, October 23, 2019 - link

    As a professional many comments here disregard what these drives are intended for and for obvius reasons you wouldn't want to buy them for a server array or high availability applications. Samsung has entered a product which is now competing with lower priced product \ brands. For the average consumer looking for a Samsung branded drive to be used as a basic storage drive for documents, photos, music and game storage it makes a lot of sense. Admittedly IMHO buying a 2TB SSD for general storage use at the $200 mark is extreme in comparison to $80 for a spinner but for some users but for gamers it may be worth the price to use as game storage drive.
  • Scour - Sunday, June 28, 2020 - link

    Question: If the SLC-cache is full, the speed drops, that´s clear. But what happened if the SSD have a power loss directly after the data-writing ends? Is all Data still accessable on the SSD (because data still have to be copied from the SLC-cache to the QLC)?
  • leexgx - Thursday, August 6, 2020 - link

    did they ever issue a firmware update with the 4TB QVO, EVO and Pro samsung ssds been problematic sometimes not working

Log in

Don't have an account? Sign up now