Thermaltake Tai Chi (cont’d)

After putting in the video card and securing it with the green plastic clips and connecting the cables, our install was complete.


Click to enlarge.

For an even better idea of what an installed system looks like in an open'Tai Chi, we stepped back a few feet and took another straight-on picture. Notice the clean, open areas – it's not a window, but opening the Tai Chi (read: letting the case open itself) sure is a neat way to show off its internals.


Click to enlarge.

With the unit closed and the hard drive cage in a lower position, a soft blue glow emanates from behind the black door's mesh.


Click to enlarge.

The rear 120mm fan makes a much stronger impression, glowing through the large open vents on the side and fan grill on the back.


Click to enlarge.

Thermaltake Tai Chi (cont’d) Cooler Master Stacker 830
Comments Locked

55 Comments

View All Comments

  • JoshuaBuss - Thursday, February 23, 2006 - link

    What about direct links to images? Does that work?
    http://images.anandtech.com/reviews/cases/roundups...">http://images.anandtech.com/reviews/cases/roundups...
  • Jojo7 - Thursday, February 23, 2006 - link

    No.
  • JoshuaBuss - Thursday, February 23, 2006 - link

    Try a refresh. Sometimes the image server gets a bit bogged down.
  • latino666 - Thursday, February 23, 2006 - link

    Still can't get crap. I notice this problem also with the newegg article too. Man oh man did I want to see those pics.
  • ATWindsor - Thursday, February 23, 2006 - link

    The tai-chi has gigantic heat-sinks on the side, but to me they seem like little more then a gimmick. Almost nothing is in physical contact with them, and when they are only taking heat fom air, they seem to be virtually useless. I bet the diffrences if one had a "standard" side would be hardly measurable.

    The CM 830 surly is more ugly than the old model IMHO, It doesn't quit have that "large clean beast"-feeling anymore.
  • Cygni - Thursday, February 23, 2006 - link

    It seems they were going for the look of the Zalman completly fanless case, but didnt bother to install the flush mount PSU or heatpipes that ran into the doors, haha. :p Oh well.
  • Tamale - Thursday, February 23, 2006 - link

    I'd call it a 'large techno beast' now ;)
  • Howard - Thursday, February 23, 2006 - link

    The 3/8" holes in the Tai Chi can easily be bored out with a twist drill bit (the regular ones) in a cordless drill. At least, they would be if the material is aluminum, and I think it is.
  • JoshuaBuss - Thursday, February 23, 2006 - link

    Yah, but it's still much easier when it can be taken apart and pieces can be worked on individually.
  • Googer - Thursday, February 23, 2006 - link

    Could you invert the motherboard on the CM Stacker by installing the tray on the left side in place of the usual right side? If you could possibly allow for better CPU cooling sine the processor would be sitting on the bottome getting plenty of cool air and allowing hot exhaust to escape upwards.

Log in

Don't have an account? Sign up now