Media Performance

We will take a brief look at general media performance with our test suite that includes Adobe Photoshop CS2 and Adobe Photoshop Elements 5.0.

We utilize the PC WorldBench 6.0 Test for measuring platform performance in Adobe's Photoshop CS2. The benchmark applies an extensive number of filters to the test image and heavily stresses the CPU and storage systems. The scores reported include the full conversion process and are represented in seconds, with lower numbers indicating better performance.

Media Performance - Adobe Photoshop CS2

This test requires a balance between CPU speed and a fast storage sub-system. Once again the P35 boards are bunched together with only four seconds separating them. The DFI board falls into the middle pack of the P35 boards although its performance is more than acceptable.

Our next test is one recommended by Intel, but the test itself appears to be fair and results are very repeatable. This test simply measures the amount of time required to fix and optimize 103 different photos weighing in at 63MB. Time is measured in seconds, with lower times resulting in better performance

Media Performance - Photoshop Elements 5.0

This test heavily stresses the CPU subsystem and as we can see, the P35 boards all perform nearly identically with the DFI board in the top grouping.

Media Encoding Performance

We are utilizing Nero Recode 2 for our video encoding test. The scores reported include the full encoding process and are represented in seconds, with lower numbers indicating better performance. For this test, we take our original Office Space DVD and use AnyDVD to rip the full DVD to the hard drive without compression, thus providing an almost exact duplicate of the DVD. We then fire up Nero Recode 2, select our Office Space copy on the hard drive, and perform a shrink operation to allow the entire movie along with extras to fit on a single 4.5GB DVD disc. We leave all options on their defaults except we uncheck the advanced analysis option.

Media Encoding Performance - Nero Recode 2

Again, in this CPU and disk intensive test the P35 boards all score nearly identically - not surprising considering the boards utilize the same chipsets. The DFI board scores at the top of the grouping this time.

Audio Encoding Performance

We will utilize iTunes 7.4 for our audio encoding tests as it is one of the most utilized audio applications available due to the immense popularity of the iPod. As in previous articles, we are using an INXS Greatest Hits CD for testing, which contains 16 tracks totaling 606MB of songs. We use iTunes to convert our WAV files into an ACC compatible format. We utilize the 256kbps and variable bit rate option.

Audio Encoding Performance - iTunes 7.4

We usually see iTunes favoring systems with excellent CPU throughput and these tests indicate the DFI board is up to speed in this area.

File Compression Performance

Another CPU crunching utility is WinRAR 3.70, which provides for computationally intensive file compression. Our test folder contains 444 files, ten subfolders, and 602MB worth of data. All default settings are utilized in WinRAR and our hard drive is defragmented before each test.

File Compression Performance - WinRAR 3.70

Yet again, the DFI UT P35-T2R is performing well in a test that stresses overall memory latencies and CPU/Memory throughput. The nature of file compression is such that memory is accessed almost constantly in a very random fashion, so page misses requiring additional time as memory banks are swapped is common.

Synthetic Graphics Performance Gaming Performance
Comments Locked

30 Comments

View All Comments

  • Acanthus - Thursday, October 18, 2007 - link

    Although all of the tweaking options provided are nice, it literally does no better than Asus P5K Deluxe or the Gigabyte P35-DQ6.

    Furthermore with X38 boards on the way, im not seeing a whole lot of incentive for this $300 motherboard.

    Just my $.02
  • retrospooty - Thursday, October 18, 2007 - link

    This board has hit 672mhz FSB, far FAR higher than any other other board ever, including early samples of X38. Not likely to be matched until the DFI X38 comes out.

    http://www.xtremesystems.org/forums/showthread.php...">http://www.xtremesystems.org/forums/showthread.php...

    This link shows it at 666mhz, I cant find the 672mhz one at the moment, but its on the same forum, by the same guy with the same golden CPU.
  • cmdrdredd - Thursday, October 18, 2007 - link

    Not usable 24/7

    WHO CARES!?
  • retrospooty - Thursday, October 18, 2007 - link

    Well, it still goes alot higher than the others you mentioned, it is absolutely the best overclocking motherboard available. - that was what I responded too, obviously its not the one for you.

  • Acanthus - Thursday, October 18, 2007 - link

    That is from the DFI labs... with a beta board... on supercooling...and volt mods... on a dual core CPU that doesnt stress the PWMs...

    Anandtechs results even using phase dont approach those results.
  • retrospooty - Friday, October 19, 2007 - link

    No, that is not from DFI labs, that is an independant dood, and CPU's that hit that high FSB are pretty rare.

    Whatever man, you can poo poo it all you want. It is the best OC mobo out there, and goes higher and takes it farther than any other. It may not be the one for you though.
  • Raja Gill - Thursday, October 18, 2007 - link

    You need to remember that this board was compared at stock settings, not OC'ed, things change up top...;), not to mention we could not get the board to crash..

    regards
    Raja





  • Acanthus - Thursday, October 18, 2007 - link

    Its the same chipset, its not going magically increase in a non-linear fashion.

    The P5K and DQ6 hit the same maximum overclock.
  • MadBoris - Thursday, October 18, 2007 - link

    It makes sense that article takes a different approach, customers of this board or tweakers in general, will really appreciate the fine details.

    Personally, in the last ten years I have gotten to a place where I am very comfortable not pushing for the last 100 - 300 mhz. The meager tangible return is not worth all the extra voltage or potential stability issues that often come up later in the life of the HW due to creep, dust, aging paste, etc. I get a nice stress test capable OC, then back it up a notch. I won't win any 3dmark awards that way though but am very satisfied with stability when a new product stresses HW in ways not stressed before.

    One thing for sure with this board, I wouldn't want to lose the CMOS, then have to remember all my settings after a year.

    Nice board and good article, $300 is too much though for a MB for me. It's definitely elite.
  • retrospooty - Thursday, October 18, 2007 - link

    Its alot of reading, but that is because the DFI is alot of motherboard. I have had it since it was first released and loving every minute of it. I have a C2D 6750 running at 8x500 fsb for a sweet 4 ghz on water at DDR2 1000 4-4-4-10 timing, man is it sweet.

    There are sooooo many bios tweaks to get better performance, or stability at high overclock - its definitely not for beginners... worth every penny of the $300 I spent.

Log in

Don't have an account? Sign up now