Confirming Your Jasper

If you can physically open the box, there's another way of confirming that you have a Jasper without even opening the plastic bag that the console comes in: look at the power connector on the Xbox 360 itself. Each Xbox 360 generation has a power connector that's keyed differently so you can't use a lower powered power supply on a console that requires more power. Now all Xbox 360 power supplies will work on newer consoles, but you can't use newer power supplies on older consoles. Make sense? Let me explain:

The first Xbox 360 (Xenon) needs a 203W power supply. Falcon needs a 175W power supply but can also work with the 203W unit (it just doesn't need to draw that much power so the 203W unit is overkill, but it'll work). Jasper needs 150W but can work with a 203W and a 175W. In other words, the Xbox 360 power supplies are forwards but not backwards compatible.

If you get a Jasper it's not guaranteed that you'll get a 150W power supply, Microsoft still has a lot of Falcons and Falcon-parts in its distribution system so some Jaspers have been sighted with 175W power supplies. If you end up with a 175W unit it's not a big deal, it's going to be slightly less efficient than the 150W unit and your system may end up drawing an extra few watts but it's not a big deal at all - you'll still be far cooler/more power efficient than a Falcon (and possibly be red-ring-free).

To prevent an under powered power supply from being used in the wrong Xbox, Microsoft keyed each of the three Xbox 360 generations differently. The chart below explains it all:


Click to Enlarge

If you see one flat bar on top and a square peg in the middle of the power connector on the console itself you've got a 1st generation Xenon or Zephyr board, these machines use 90nm CPUs and GPUs. If you've just got a flat bar on top with no square peg in the middle, you've got a 2nd generation Opus or Falcon board, these things use 65nm CPUs and 80nm GPUs. Finally if you've got a flat bar split in two on top with no square peg you've got a Jasper, that's a board with a 65nm CPU and a 65nm GPU.

Identifying a Jasper Jasper Dissection
Comments Locked

84 Comments

View All Comments

  • george1976 - Thursday, December 11, 2008 - link

    I feel sorry for the x360 buyers that experienced RROD. I cant picture myself buying a product with such a high rate of failure.....50%???? Damn.
  • TiM3SH1FT - Thursday, December 11, 2008 - link

    Anyone knows if the new Jasper is out on other models than the Arcade?

    I'd like to have Jasper but not the arcade pack...

    Also how do I transfer my HDD content to a new HDD?
  • 01wolff - Thursday, December 11, 2008 - link

    When you get a Xbox that has a larger hard drive, you can go on the Xbox 360 site under support and request the transfer kit. It is free from microsoft. They messed up and sent me two of them. If you buy just the hard drive, some come with the kit already (like the 120Gb hard drives). If you just change from one 20Gb to another 20 Gb drive, or from a 60 Gb drive to another 60Gb drive.... Microsoft won't do anything. You have to go up in hard drive capacity. Once you have the kit, then you have to go on the 360 site to modify your DRM information also.

    The alternitave is to not get the transfer kit, change your DRM info on the site, and download everything again. I think using the kit is a better option. (did it from my 360 Prem to my 360 Elite)
  • Myrandex - Thursday, December 11, 2008 - link

    I'm not saying that the failures are made up, but I did want to indicate that I have an original XBox360 Premium and it is still standing up well to the test of time. I have thought about trying to get it real hot and see if it fails just to RMA it and hope for a new one with maybe HDMI and less electricity usage, but I'm pretty satisfied with mine.
    Jason
  • 01wolff - Thursday, December 11, 2008 - link

    After reading this I had to check both of my 360's. What I found baffled me. My Elite 360 had the 12v like the Jasper, but the second-generation power plug. Hummmmmmmm.
  • rekcah2000a - Thursday, December 11, 2008 - link

    Same here 16.5A on sticker but power supply 175W and Opus/Falcon power connector
    A new strange beats from M$ ?
    Tom from BELGIUM
  • bill3 - Thursday, December 11, 2008 - link

    The power usage comparisons, and most important the die size comparisons are great stuff for console/GPU tech junkies like myself.

    Although now that I've seen the comments wishing for noise level comparisons, I have to admit that would have made the article complete..
  • bill3 - Thursday, December 11, 2008 - link

    Besides comparing Xenos to X1800, another inaccuracy was referring to the 256MB internal flash as a improvement. All that does is replace the 256 MB external memory card that used to come with Arcade unit. In essence the same memory card comes with the unit as before, it has just now been made internal. If anything this is a downgrade, as the external mem card has the advantage of portability, aka taking your profile and saves to a friends house and so forth.

    I believe MS made the memory internal to prevent it from being separated from the console in anyway (lost, etc) and having consoles not capable of running NXE (NXE requires 128 MB memory I believe, though I'm not sure if thats only for the install?) out there in the wild. That's my theory.
  • poohbear - Thursday, December 11, 2008 - link

    BLASPHEMERSS!!!!! you review console stuff on a pc hardware site?!!?!?? how could u
    ?!?!?
  • strikeback03 - Thursday, December 11, 2008 - link

    The subtitle says "your source for hardware analysis and news". As this is hardware, I'd say it fits more than reviews of games...

Log in

Don't have an account? Sign up now