ASUS E35M1-M Pro Review - Anyone For Fusion?
by Brendan van Varik on October 25, 2011 5:00 AM EST- Posted in
- Asus
- Motherboards
- Fusion
- E-350
The ASUS E35M1-M PRO is currently retailing at Newegg.com for $119.99. The price puts this motherboard more or less in the middle of the lot and considering it does beat some of the more expensive motherboards, it is a great contender in the world of low powered computing.
ASUS have provided us with a generous amount of features on the motherboard. Unfortunately, as said earlier, no USB 3.0 bracket was included (given the price of the board this is perhaps understandable), but for some reason there were two extra SATA 6 Gbps cables in the box than advertised. All of the SATA cables are angled at 90 degrees and have locking ends. The total number of USB 2.0 headers can provide an additional eight ports.
The A50M motherboard market is a contested one with many manufacturers bringing out similar products at very similar prices. In order to stand out from the crowd, you have to perform better than the rest, which is what the E35M1-M PRO has demonstrated in most of the tests that were in this review.
The BIOS itself is feature rich and there is not anything I could currently think of which I would change about it. The only issue experienced was to do with a wireless keyboard/mouse compatibility issue but wireless keyboards and mice are not in the EFI standard so I cannot fault ASUS for this or any other manufacturer where this issue may arise.
In tests conducted on other Fusion motherboards, there were no real benefits from using a discrete GPU as it would appear that there just is not enough power available from the processor. However, if you are gaming at low resolutions with low settings, this motherboard does very well for itself and takes the performance crown on the A50M platform from the boards we have tested.
ASUS backs up the boards with a standard 3 year warranty.
Facebook
Twitter
RSS
66 Comments
View All Comments
hackztor - Tuesday, October 25, 2011 - link
I have the non pro version and after 2 months the nic died. I sent it in to asus repair and they said they repaired it and its still dead. Going to return it to newegg. The problem when the nic dies is their is only 1 slot on the non pro and that is used by my sata card stuff.ven - Wednesday, October 26, 2011 - link
Nobody is going to use a discrete graphics card with this board i don't know why all the manufactures uses x16PCIe slot.I was greatly surprised to see the presence of the slot for the first time before i came to known it was working in x4 mode.And also i don't think apart from video card there is no other PCIe card which extends that much length.mino - Wednesday, October 26, 2011 - link
Because it is really PCIe x4 slot and why not give you a full PCIe x16 instead of limiting user choices needlessly ? ...Mugur - Wednesday, October 26, 2011 - link
Nice review, but I was waiting for an E-450 review... :-) At least in Europe, there is an Asus model widely available.silverblue - Wednesday, October 26, 2011 - link
http://laptoping.com/amd-e-450-amd-radeon-hd-6320-...Death666Angel - Wednesday, October 26, 2011 - link
In one instance you talk about being "well within statistical variance", in another, you make it sound as though a .31 fps difference (which amounts to 1% deviation in this case) is grounds to separate the devices used.
Either you go all the way (and are wrong) and don't mention statistical variance and treat every result you have as being 100% perfect. Or you do take into account standard deviation and variance and don't make a 1% difference into an actual difference.
Otherwise, a good board and a good review. :-)
Though I still think a small Llano or a small Corei3 maintain the better package and don't really cost that much more. Cooling can be handled silently as well.
Daedalus454 - Wednesday, October 26, 2011 - link
I just upgraded my home server to this board last night. I'm running two Debian VMs on Xen. The E-350 is the fastest low-power system that I'm aware of which supports virtualization - AMD-V in this case. Atom based boards do not support VT-x. The extra slots on this particular board are nice as I need the PCIe x4 slot for my RAID controller, and this board gives me an extra x1 slot to add a second NIC if I need to do so in the future.The old system was a Brisbane Athlon 64 x2, I don't recall the speed. With the E-350 board performance is quite good. My VMs are running well and SMB transfers are quick.
The reason for my switch was that the old system pulled about 95 watts idle and 135 watts normal load and generated a lot of heat. That got uncomfortable since the server lives in my bedroom closet. The new system draws 65 watts full bore. Both systems include a Dell PERC5/i RAID controller and 3 1.5TB hard drives in RAID5. Xen doesn't seem to be very good about switching power states on this board however. I might need to adjust some settings on my Dom 0.
EVRE - Wednesday, October 26, 2011 - link
My friend who lives off the grid just build one of these.His setup:
Crucial 120gb m4 ssd
8gb of standard 1333 ram
sata dvd rw
DC DC 80w power supply from 12v corded brick (looks like an xbox 360's)
His idle power consumption is 16-17 watts at the wall with a Kill A Watt.
fluxtatic - Thursday, October 27, 2011 - link
For those who say go cheap on a SB system, consider that then you end up with some crap Biostar board. Here, you're getting an Asus (it seems to swing either direction, but they are one of the largest for a reason.) If you could build a comparable SB system on a decent board (Asus, Gigabyte, MSI), then maybe we're have a real debate. YMMV, but I would never recommend a cheap knockoff MB to save a few bucks on system like this.As to the x16 slot, I have come to the conclusion that it's a cost thing - a company like Asus is going to be buying the x16 slot connectors by the truckload, making the cost nothing. They're not going to get nearly as good a deal on open-ended x4-sized connectors, given that they would likely only be used on these Fusion boards (how often do you see dedicated x4 slots?)
I picked up a Sapphire Pure board in the spring, building a NAS/HTPC/server sort of thing...had I known that it wouldn't be done by now (waiting on the final finish for the scratch-built case), I would have waited...mine was $140, as I recall, was one of 2 that had 5 SATA ports. I almost bought this Asus, but it was a decent amount more then - $170 or so.
When it gets down to it, the Brazos platform outdoes Atom in everything but power consumption. If you look at Atom+Ion, they're closer, but Brazos still has a bit of an edge, and Ion brings the power consumption up to comparable levels, too. Face it - on this front, AMD finally has a winner. Cold comfort for those of us who waited (and waited) on BD, but there it is. Now I'm waiting for the Krishna core next year - I might just build two new boxes on that if AMD keeps up what they've done with Brazos so far.
Aries1470 - Thursday, October 27, 2011 - link
Hmm... I looked in the comments and also selected the print version too, it is shown in the picture of the back panel, it was even left out on page 3, board features.Why is that? I guess some people would still be interested in ieee-1394a.
It is also on the Asus' website:
http://www.asus.com/Motherboards/AMD_CPU_on_Board/...
one on the backpanel and one on the board too ;-)
Ok, end of rant :-)
Nice and informative article. Thank you.
Now to wait for the review of the Zotac ZBOX Mini-PC. This has the Via cpu, and is a great alternative to the Intel Atom too, and for Watt to Watt, might actually beat or be similar to this board.
Info on some of their Via Nano and Nano X2 boards here:
http://www.zotac.com/index.php?lang=un
Just search the site.
So Brendan, any idea when to expect an Atom vs Nano X2 vs AMD E or C series?