AMD's 12-core "Magny-Cours" Opteron 6174 vs. Intel's 6-core Xeon
by Johan De Gelas on March 29, 2010 12:00 AM EST- Posted in
- IT Computing
Rendering: Cinebench 11.5
The old Cinebench 10 benchmark was limited to 16 threads. Luckily, the new Cinebench 11.5 does not have that limitation. Cinebench only represents a very small part of the 3D Animation market, but the advantage is that this a benchmark that you can perform at home too.
Although the Opteron 6174 manages to stay close to the newest Xeon, the Xeon is the CPU to get. The reason is that the performance difference will grow as you are rendering smaller and less complex scenes. In those cases, the percentage of the serial code will increase. And Amdahl’s law is unrelenting: in that case the CPU with the highest single threaded performance will win. You also get the benefit of higher single threaded performance when you are modeling.
Facebook
Twitter
RSS
58 Comments
View All Comments
Cogman - Tuesday, March 30, 2010 - link
It should be noted that newer nehelam based processors have specific AES encryption instructions. The benchmark where the xeon blows everything out of the water is likely utilizing that instruction set (though, AFAIK not many real-world applications do)Hector1 - Tuesday, March 30, 2010 - link
I read that Intel is expected to launch the 8-core Nehalem EX today. It'll be interesting to compare it against the 12-core Magny Cours. Both are on a 45nm process.spoman - Tuesday, March 30, 2010 - link
You stated "... that kind of bandwidth is not attainable, not even in theory because the next link in the chain, the Northbridge ...".How does the Northbridge affect memory BW if the memory is connected directly to the processor?
JohanAnandtech - Wednesday, March 31, 2010 - link
Depending on your definition, the nortbridge is in the CPU. AMD uses "northbride" in its own slides to refer to the part where the memory controller etc. resides.Pari_Rajaram - Tuesday, March 30, 2010 - link
Why don't you add STREAM and LINPACK to your benchmark suites? These are very important benchmarks for HPC.JohanAnandtech - Wednesday, March 31, 2010 - link
Stream... in the review.piooreq - Wednesday, March 31, 2010 - link
Hi Johan,For last few days I did several tests with Swingbench CC with similar database configuration but I achieved a bit different results, I’m just wondering what exactly settings you put for CC test itself. I mean about when you generate schema and data for that test? Thanks for answer.
JohanAnandtech - Thursday, April 1, 2010 - link
Your question is not completely clear to me. What is the info you would like? You can e-mail if you like at johanATthiswebsitePointcomzarjad - Wednesday, March 31, 2010 - link
Can't figure out if hyperthreading were enabled on Intels. Particularly interested in virtualization benchmark with hyperthreading both enabled and disabled. Also of interest would be an Office benchmark with a bunch of small VMs (1.5 to 2GB) to simulate VDI configuration.JohanAnandtech - Thursday, April 1, 2010 - link
Hyperthreading is always on. But we will follow up on that. A VDI based hypervisor tests is however not immediately on the horizon. The people of the VRC project might do that though. Google on the VRC project.