Last week OCZ pulled the trigger and introduced the world’s first SF-2000 based SSD: the Vertex 3 Pro. Not only was it the world’s first drive to use SandForce’s 2nd generation SSD controller, the Vertex 3 Pro was also the first SATA drive we’ve tested to be able to break 500MB/s on both reads and writes. Granted that’s with highly compressible data but the figures are impressive nonetheless. What wasn’t impressive however was the price. The Vertex 3 Pro is an enterprise class drive, complete with features that aren’t exactly in high demand on a desktop. As a result the V3P commands a premium - the drive starts at $525 for a 100GB capacity.

Just as we saw last round however, if there’s a Vertex 3 Pro, there’s bound to be a more reasonably priced non-Pro version without some of the enterprisey features. Indeed there is. Contained within this nondescript housing is the first beta of OCZ’s Vertex 3 based on a SandForce SF-2200 series controller. The price point? Less than half of that of the V3P:

Pricing Comparison
  128GB 256GB 512GB
OCZ Vertex 3 Pro $525 (100GB) $775 (200GB) $1350 (400GB)
OCZ Vertex 3 $249.99 $499.99 N/A

At an estimated $250 for a 120GB drive the Vertex 3 is more expensive than today’s Vertex 2, but not by too much nor do I expect that price premium to last for long. The Vertex 2 is on its way out and will ultimately be replaced by the V3. And SSD prices will continue to fall.

What sets a Vertex 3 apart from a Vertex 3 Pro? Not all that much, but SandForce has grown a lot in the past year and instead of just a couple of SKUs this time around there are no less than seven members of the SF-2000 family.

You should first know that SandForce only produces a single die, the differences between all of the members of the SF-2000 family are strictly packaging, firmware and testing.

The main categories here are SF-2100, SF-2200, SF-2500 and SF-2600. The 2500/2600 parts are focused on the enterprise. They’re put through more aggressive testing, their firmware supports enterprise specific features and they support the use of a supercap to minimize dataloss in the event of a power failure. The difference between the SF-2582 and the SF-2682 boils down to one feature: support for non-512B sectors. Whether or not you need support for this really depends on the type of system it’s going into. Some SANs demand non-512B sectors in which case the SF-2682 is the right choice.

You may remember that our Vertex 3 Pro sample used a SF-2682 controller. That’s because initially all SandForce made were SF-2682s. Final versions of the V3P will likely use the cheaper SF-2582.

The SF-2200/2100 series are more interesting because of their lower target price points. You lose support for the supercap but that’s not as big of a deal on the desktop since you’re not working with mission critical data. The big difference between the 2200 and 2100 is support for 6Gbps SATA, the former supports it while the latter doesn’t. This is a pretty big difference because as we’ve seen, when paired with a 3Gbps controller the SF-2000 isn’t too much better than what we had with the SF-1000.

The other big difference is the number of byte lanes supported by the controller. The SF-2181 and above all support 8 NAND flash channels, however only the SF-2282 supports 16 byte lanes. Each NAND device is 8 bytes wide, supporting 16 byte lanes means that each channel can be populated by two NAND devices. This lets a single SF-2282 controller talk to twice as many NAND devices as a SF-2281.

There’s no performance difference between the 8 and 16-byte lane versions of the chip, it’s just a matter of pure capacity. Thankfully with 25nm NAND you can get 8GB of MLC NAND on a single die so both the 2281 and 2282 should be able to hit 512GB capacities (the 2281 simply needs higher density NAND packages).

The Vertex 3 sample we have here today uses the SF-2281. Our sample came configured with sixteen 16GB Micron 25nm ONFI 2.0 NAND devices. Remember that while both Intel and Micron own the 25nm fabs, the two companies are providing different specs/yields on 25nm NAND. The 25nm Micron stuff is rated at around 3,000 p/e cycles from what I’ve heard, while the Intel 25nm is rated at 5,000. The main difference here is that the Micron is available in great quantities today while the Intel 25nm isn’t.

RAISE: Optional

One other difference between the SF-2500/2600 and the SF-2100/2200 is the optional nature of RAISE. You'll remember that in order to allow for lower quality NAND SandForce stripes a small amount of redundant data across the array of NAND in a SF-1000/2000 drive. SandForce never stores your actual data, rather a smaller hash/representation of your data. When your data is compressed/deduped for storage, SandForce's controller also generates parity data equal to the size of a single NAND die in the array. This process is known as RAISE (Redundant Array of Independent Silicon Elements) and it allows you to lose as much as a full NAND die worth of data and still never see a bit of data loss from the user's standpoint. At 25nm however a single die can be as large as 8GB, which on a lower capacity drive can be a significant percentage of the total drive capacity.

With the SF-2100/2200, SandForce allows the manufacturer to disable RAISE entirely. At that point you're left with the new 55-bit BCH ECC engine to do any error correcting. According to SandForce the new BCH ECC engine is sufficient for dealing with errors you'd see on 25nm NAND and RAISE isn't necessary for desktop workloads. Drive makers are currently contemplating what to do with RAISE but as of now the Vertex 3 is set to ship with it enabled. The drive we have here today has 256GB of NAND, it'll be advertised as a 240GB drive and appear as a 223.5GB drive in Windows.

Here We Go Again: 4KB Random Write IOP Caps

With the SF-1200 SandForce capped the peak 4KB random write speed of certain drives while negotiating exclusive special firmware deals with other companies to enable higher performance. It was all very confusing as SandForce shipped initial firmware revisions with higher performance and later attempted to take that performance away through later firmware updates.

If you pay attention to the table above you’ll notice that there are two specs for 4KB random write IOPS: burst and sustained. The burst value is for around 15 seconds of operation, the sustained is what happens when the firmware initiated performance cap kicks into action. By default the SF-2100/2200 drives have a cap of 20,000 IOPS for 4KB random writes. After a period of about 15 seconds, the max performance on these drives will drop to 20K. The SF-2500/2600 controllers are uncapped, max performance can remain at up to 60K IOPS.

The beta Vertex 3 review sample I have here today manages around 45K IOPS in our 4KB random write test. That test runs for 3 minutes straight so obviously the cap should’ve kicked in. However it didn’t.

I asked SandForce why this was. SandForce told me that the initial pre-release firmwares on the SF-2200 drives don’t have the cap enabled, but the final release will put the cap in place. I also asked SandForce if it was possible for one of its partners to ship with a special firmware build that didn’t have the cap in place. SandForce replied that anything was possible.

I asked OCZ if this meant the drive I was testing wasn’t representative of final, shipping performance. OCZ stated very clearly that performance will not change between the drive I have today and the drive that goes on sale in the next 2 months. To me this sounds like SF and OCZ have struck another exclusive firmware deal to ensure slightly higher performance on the Vertex 3 compared to a standard SF-2200 based drive.

SandForce wouldn’t comment on any existing agreements and OCZ said it couldn’t get SandForce to confirm that the V3’s performance wouldn’t change between now and its eventual release. Based on what we saw last time I expect SandForce to offer the 60K IOPS firmware to all partners that meet certain order size commitments. Order enough controllers and you get a special firmware, otherwise you’re stuck with the stock SF-2200 firmware.

Of course this makes things very confusing for those of you looking to shop around when buying a SF-2200 drive. I do wish SandForce would just stick to a single spec and not play these sorts of games but that’s just how business works unfortunately.

The good news is that for most desktop workloads you don’t really benefit from being able to execute more than 20K IOPS, at least in today’s usage models.

Faster than a Vertex 3 Pro & The Test
Comments Locked

85 Comments

View All Comments

  • seapeople - Thursday, February 24, 2011 - link

    I think the answer you are searching for is a bit more mundane than you desire. For example, when you load a map you are storage limited whether you have an SSD or not, and when you are fighting bad guys you are CPU limited whether you have a slow HD or not.
  • vol7ron - Saturday, February 26, 2011 - link

    While that's true, I'm not sure that's what he's referring to.

    If you're ever CPU limited, it's probably not just because of an SSD, it's just the fact that you need a better CPU. Generally, CPU limitations are apparent from memory access, not due to SSDs.

    I can understand what he's saying though as I'm still running a C2D and it gets to 100% during games. Not to mention, there does seems to be hang ups on Win7 64b startup, due to all the applications, widgets, and services that load; but that's less to do with the SSD and more to do with the CPU. The load time would be just as long w/o the SSD, it's just that there wouldn't be as much of a hang-up as the sluggishness would be constant.

    Having more cores in this instance would certainly help.
  • Nentor - Thursday, February 24, 2011 - link

    First paragraph:
    "What wasn’t impressive however was the price."

    There is not a word about price in the article about the V3Pro. Not even a slight indication implying a high price which made it seem affordable.

    Also this:

    ---I asked OCZ if this meant the drive I was testing wasn’t representative of final, shipping performance. OCZ stated very clearly that performance will not change between the drive I have today and the drive that goes on sale in the next 2 months.

    SandForce wouldn’t comment on any existing agreements and OCZ said it couldn’t get SandForce to confirm that the V3’s performance wouldn’t change between now and its eventual release.---

    What exactly does that mean? It comes down to not meaning anything at all to me.
  • ClagMaster - Thursday, February 24, 2011 - link

    I went half-way through this article and was frustrated with the complexity of the SandForce Controller capabilities and firmware games.

    It would seem SandForce is very Intel-like in its conduct. Why cannot they have 2-3 stinking controllers setup for maximum performance without these firmware games ? The hardware is willing but the businessmen are not.

    Last night I was about ready to purchase a 120GB SSD but decided this was an extravagance for my desktop for $220. I would rather have a good Western Digital Black 1.0 TB harddrive than this SSD. I get much more for my money. I still use Windows XP Home because of its efficiency and minimalist memory foot print. Are there any garbage collection utilities I can use for this still excellent OS? This is not clear from the vendor sights.

    Can anyone enlighten me as to what is available for Windows XP so these SSD's continue to operate in prime form ?

    I cannot believe consumers are willing to pay this kind of money so they shave off 15 to 20 seconds off boottimes.
  • 86waterpumper - Thursday, February 24, 2011 - link

    I agree whole-heartedly with you about the frimware games...that is def. lameness.
    With that being said, I don't think that ocz drives are really more expensive than other brands so I guess the solution for now is just to buy their drives instead of the competitions which is exactly what they want right? haha.
    I disagree though with you about ssd not being worth it. I know they are high, but shaving 15 to 20 seconds off boot time is huge in my book. I mean that is half the time in alot of cases. That has a coolness factor to it, but the main benefit I see is being
    able to multitask better, and having programs and games load faster. The boot time is just a side benefit really. Quietness and low heat and power draw are other nice features. Anyway I remember people were happy to pay the price for raptors not long ago, and they were this expensive and much less capacity than regular drives. They did not represent nearly the performance gap either.
  • Barbaniko - Thursday, February 24, 2011 - link

    Anand,
    How about Garbage collection on the Vertex 3?
    How would it hold up over time without access to winnows 7 trim command?
    I am interested in putting two of these in a Raid 0 configuration.
    Thank you.
  • arm3n - Monday, February 28, 2011 - link

    I second this request. Would love to get your take on these bad boys striped.

    Thanks!
    Armen
  • gstrickler - Friday, February 25, 2011 - link

    Anand,
    I've been searching for reliable information about the AES encryption on SF based SSDs. From the information I've been able to get from the manufacturers, this is NOT TCG "OPAL" compatible FDE, it's passive encryption that does not require any BIOS support, TCM, or boot time password. If that's accurate, then it's almost useless. It doesn't protect your data if your SSD is stolen. Therefore, it is of limited value.

    What that does do is protect the data from being recovered from the NAND Flash chips on a failed SSD, and executing a "erase" ATA command will change the password and make all your data, including bad blocks and reserved overallocation areas, inaccessible after the erase. Clearly, that has value to those reallocating a used drive, but that's about the extent of it's value.

    There is certainly some value in that, as securely erasing the data from an SSD can be challenging because of the LBA->Flash block remapping that SSDs perform. However, if it doesn't support "OPAL" FDE, then you must fall back to software FDE and the performance penalty for software FDE on an SSD is far more significant than it is for a HDD, and effectively eliminates much of the performance benefit of an SSD.

    Please check with SandForce and/or the SSD vendors and report if any of them support TCG compatible "OPAL" FDE. That information is vital to users who need to use FDE.
  • ac2 - Friday, February 25, 2011 - link

    +1

    The AES encryption bit sounds like one of those meaningless marketing bullet points...
  • iwod - Friday, February 25, 2011 - link

    The Anand SSD benchmarks 2010 and 2011 are the closest we get to real life measurements.

    And if those results are correct. Then our previous estimation of Seq Read Write become not important as we move faster will be incorrect. It turns out most of our time we are doing Seq Read Write. Therefore it is the Random Read Write has reach its tipping point and not providing any more Real World Improvement to users.

Log in

Don't have an account? Sign up now