Ubiquiti Networks mFi mPower Wi-Fi Power Strip Review
by Ganesh T S on November 21, 2013 3:00 AM EST- Posted in
- Home Automation
- Wi-Fi
- Ubiquiti Networks
- IoT
Inside the mPower
The mPower can be accessed and controlled via SSH even without linking it with a mFi host. In this case, the SSH login credentials are the default (ubnt/ubnt). The mPower unit runs Linux under its hood, with BusyBox providing much of the needed access functionality. The unit uses the Dropbear SSH server service. Accessing the unit over SSH gives us some insight into the core platform.
The mPower uses the Atheros AR9330 Hornet platform (more commonly found in wireless access points / low end routers such as this one) for its networking functionality and host CPU. The unit has 16 MB of RAM. The more interesting aspect is the chip used for collecting the electrical parameters. Ubiquiti takes pride in the fact that the electrical statistics are gathered by utility-grade ICs rather than the ADCs employed by other competing solutions. The mPower uses the Prolific PL7223 for gathering the electrical parameters. The PL7223 is apparently popular in these circles, as it also finds a place in GainSpan's SmartPlug kit. At this price point, it would be unfair to expect solid-state relays. So, we do have the clicking sounds when outlets are turned on or off.
FCC reports for all of Ubiquiti's products are linked on this page. We could have torn down the mPower unit ourselves, but, with the details of the platform evident from gaining SSH access, we leave it to the photographs provided in the FCC submission. They are reproduced in the gallery below.
In the next section, we will look into taking advantage of SSH for the development of custom applications.
Facebook
Twitter
RSS
61 Comments
View All Comments
Daniel Egger - Thursday, November 21, 2013 - link
So how much is the power consumption of the device itself? Can WiFi be turned off on the Pro version? Why does the European version need to be so ugly? Questions and more questions...ganeshts - Sunday, November 24, 2013 - link
Replied to another poster - the power consumption is less than 1 W at idle, but with the network interface up. Wi-Fi can be turned off -- after all, you have SSH access to the unit - you can do anything you want to be done on a persistent basis using some scripts to run on the device at start time.clarkn0va - Thursday, November 21, 2013 - link
"The mFi controller software (Windows version) needs rework for better stability"FTFY. I haven't used the mFi software yet, but UBNT's controller software (Unifi, AirVision, AirControl) is well known for running much better on Linux than Windows. Each product has its own development team, but they pretty much all install great on Linux hosts and start automatically as a service.
Meanwhile, the Windows version tend to suffer from installation difficulties, stability problems, and the number one complaint in the forums probably being the fact that they aren't designed to run as a service, meaning that you have to actually log into Windows and run the executable before you can connect to it. This shortcoming has been worked around by users in the case of most of the products (thank goodness for the open nature of UBNT's software product development), but the "easy" way to use UBNT's software controllers, ironically enough, is to run them on Linux.
I realize Anandtech caters to the Windows crowd, but it's not fair to say that a product is unstable when the Linux version isn't, or incompatible when it's available on Windows, Mac and Linux.
dylan522p - Thursday, November 21, 2013 - link
I like ganesh and many of his articles, but this has to be one of your worst articles ever. I really hope you do not fall and.continue to post article of this level because it honestly is a shame to the Anandtech name to have things like this posted.dac7nco - Friday, November 22, 2013 - link
Ganesh, most UPS have at least ethernet+RS-232, and most I've used connect to a switch or router for management, and a PDU for rack management... This is not new stuff, enabling and disabling power connections, nor are WiFi consoles... I've been doing it since 1995.......Daimon
ganeshts - Friday, November 22, 2013 - link
Daimon, I think the integration with mFi which allows rules creation is the primary aspect here. Of course, the reason we even wanted to get this unit in is because of its power measurement capabilities (real-time). And the clincher is the price point!We have looked around quite a bit for automating our lab infrastructure and measuring power consumption of various devices during different modes of operation. For example, over the last one year, all the power consumption numbers that I have reported have been gathered through the UFO Power Center. In the future, I hope to use either the UFO Power Center or the mPower unit.
Please do point me to any UPS / PDU combo which can solve the remote switching as well as power consumption measurement problem for us at this price point, and I am pretty sure both us and other readers will be happy to check those out.
dac7nco - Friday, November 22, 2013 - link
Checkout Cyberpower and APC; these guys "pure-sine wave" products are leaps and bounds above trip-lite. What you are looking for are their systems which have management consoles; hook to switch with a $2 cat-5 and you're done. Your various sytem/rack-peripheral is offline for maintenance on your own terms. Combine this with IPMI (on your switch)and you manage not only power/power-states/RDP, but you have an IP address for power AND management. Win Win.Daimon
ganeshts - Friday, November 22, 2013 - link
Do those vendors have any products which are sub-$200 and can still do real time power measurement? The last I checked, they do have $800 - $1K PDUs with management consoles, and even those do not have real time power measurement capabilities on a per-outlet basis.dac7nco - Friday, November 22, 2013 - link
Yep. USB power reporting.http://www.newegg.com/Product/Product.aspx?Item=N8...
ganeshts - Friday, November 22, 2013 - link
I looked into the Cyberpower PowerPanel manual, but it is still not clear whether one can log the power consumed by each outlet at configurable intervals / there is a simple API or HTTP query that one can use to poll these values. There is no information on how often these power consumption values get updated too.Otherwise, yes, these UPS management softwares seem to be really feature heavy. As I see in the Newegg comments, $170 is not going to give a network port -- but I can definitely see the appeal for the usage scenario where a UPS is required along with remote switching capabilities
For this product, the appeal would lie in the fact that the unit runs Linux, one can run custom scripts inside the unit and finally, for our purpose, provide an idea of real-time power consumption with high accuracy and with open APIs. Other than the UFO Power Center and the mPower units, I can't see other good alternatives for the feature set. (The UFO Power Center doesn't run Linux, though, but, can be accessed through simple HTTP commands)