Lexar Professional Workflow HR2 4-Bay Thunderbolt 2 / USB 3.0 Reader Hub Reviewby Ganesh T S on June 22, 2017 8:00 AM EST
Content creators in the field often have to deal with large amounts of data spread over multiple flash media. Importing them into a computer for further processing has always been a challenge. Casual users can connect the cameras directly to a PC, while some might prefer taking the card out and using a card reader for this purpose. There are a multiple options available in the card reader market. However, professionals who value cutting down the media import time need to opt for readers with a USB 3.0 and/or Thunderbolt interface. Lexar has a range of card readers and a 4-bay hub (the Lexar Professional Workflow HR2) to go with them. In this review, we take a look at the hub in action. The process also allows us to create a framework for reviewing flash-based storage media for non-PC applications.
Lexar is a division of Micron Technology, and caters to the consumer memory market. Their product lines include memory cards, USB flash drives, card readers, and external SSDs. The main target market is content creators who work primarily in the field. As digital photography took hold, two main memory card formats gained prominence - CompactFlash and SD. However, as bandwidth requirements increased with the advent of high-resolution video, other memory card formats such as CFast and XQD are also getting a toehold in the market.
Lexar's approach to the card reader market is very interesting. Most of their readers come in a standard size and have an appropriately located USB 3.0 Type-B female port in the rear. The hub we are reviewing today (HR2) has four slots into which these readers can be inserted. The slots have a USB 3.0 Type-B male port inside, allowing four different readers to be linked to a single backplane. The CFast 2.0 reader is a bit different, though. In addition to the USB 3.0 port that allows it to communicate through the hub, it also sports a Thunderbolt 2 port. However, the Thunderbolt port is not used when the reader is accessed via the hub.
The Lexar Professional Workflow HR2 is sold as a pure 4-bay hub and does not come with any readers (or, cards - but, that is obvious). For the purpose of our review, the following Lexar Professional components were used:
- Workflow HR2 4-bay Thunderbolt 2 / USB 3.0 Hub
- Workflow CR2 CFast 2.0 Thunderbolt / USB 3.0 Reader
- Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Reader
- Workflow CFR1 CompactFlash UDMA 7.0 USB 3.0 Reader
- Workflow XR2 XQD 2.0 USB 3.0 Reader
- 3600x CFast 2.0 128GB Card
- 1800x microSDXC UHS-II U3 Class 10 128GB Card
- 1000x SDXC UHS-II U3 Class 10 128GB Card
- 2933x XQD 2.0 128GB Card
- 1066x CompactFlash UDMA 7 128GB Card
The readers and cards allowed us to put the hub to extensive use and also helped in developing a framework for performance evaluation of the cards.
The Workflow HR2 package comes with the main unit, a Thunderbolt 2 cable, a USB 3.0 Type-B male to Type-A female cable, and a 60W adapter (12V @ 5A) along with adapter plugs for various locales.
On the rear, we have a USB 3.0 Type-B female port and the power adapter inlet. There are two Thunderbolt 2 ports, allowing the hub to be part of a daisy-chain configuration. The bays are protected by faceplates that are easy to take out, as shown in the gallery below. The card readers come with the appropriate cables and also a dust cover.
The readers can be used standalone, and are bus-powered. Note that the CFast 2.0 reader's Thunderbolt interface is utilized only when it is used standalone, and not as part of the hub. The hub acts as a USB 3.0 to USB 3.0 / Thunderbolt bridge, while supporting various other Thunderbolt features. The bandwidth part, unfortunately, is restricted to what the USB 3.0 interface can support - an issue for some of the CFast 2.0 cards that claim read speeds of 540 MBps.
Post Your CommentPlease log in or sign up to comment.
View All Comments
DanNeely - Thursday, June 22, 2017 - link"The corresponding graphs for similar cards that we have evaluated before is available via the drop-down selection." I'm 2 pages into the review, and these seem to be completely MIA so far. each dropdown only has the single product under review.
ganeshts - Thursday, June 22, 2017 - linkDanNeely, Thanks for your note. As you might have already guessed, that text is part of our drop-down template. The plan is to add more cards to the drop-down as and when we evaluate cards. We have started off with the Lexar cards, and expect products from more vendors to be part of the bench in the near future.
In any case, to avoid confusion, I have taken off that sentence from the relevant sections.
Sarah Terra - Wednesday, June 28, 2017 - linkWell, lexar has been discontinued, including all readers and cards...so if you want one of these buy it now, or conversely buyer beware...your warranty just went bye bye!
damianrobertjones - Thursday, June 22, 2017 - linkGoes to ebay, buys a £15 USB card reader, smiles as it's tiny and reads most media. Sure, it's not a speed demon, but the device above is a bit big and a bit silly.
rtho782 - Thursday, June 22, 2017 - linkDevices like this are aimed at professionals who have just recorded a whole wedding on a DSLR or whatever, not me or you writing the odd microsd for our raspberry pi.
Your argument could be used to say we should all use netbooks. Not speed demons, but desktops are a bit big and a bit silly.
lazarpandar - Thursday, June 22, 2017 - linkI actually use a raspberry pi, 5'' screen and a usb battery pack I fished out of a dumpster when im on the go. netbooks are big and a bit silly.
GraXXoR - Tuesday, July 4, 2017 - linkI actually use a smartwatch for all my computing needs. Holdables are big and a bit silly.
Hurr Durr - Friday, June 23, 2017 - link>professional
Not even students stoop that low nowadays.
damianrobertjones - Saturday, June 24, 2017 - linkThen they simply need the fastest SD card reader they can get.
No need to justify this crazy priced device. It's not really needed. Plus a company should really have a standard for kit/cameras. You NEED the best dslr lens for quality and the best reader, which is obvious, but the device above just seems too big
hieuhef - Monday, June 26, 2017 - linkSo I'm a wedding photographer, and this enables me to offload multiple cards at once while not needing to babysit each card individually. Totally worth the real estate it takes on my desk and I know many photographers that use it.
Only silly for a hobbyist, but like rtho782 said, you're not its target audience.